Need info on an inherited guitar.

Vintage, Modern, V & C Series, Signature & Special Editions

Moderators: rickenbrother, ajish4

Post Reply
Beta5788
New member
Posts: 1
Joined: Tue Apr 18, 2017 6:51 pm

Need info on an inherited guitar.

Post by Beta5788 »

I inherited this guitar and have been trying to find more info on it, but have not had much luck. In all the searching I have done thus far I have not seen another of the same, and have not found someone else who has. Any info would be greatly appreciated.

Thanks!
--Justin
Attachments
image.jpg
image.jpg
image.jpg
User avatar
loverickbass
Veteran RRF member
Posts: 1409
Joined: Mon Jul 29, 2002 5:00 am

Re: Need info on an inherited guitar.

Post by loverickbass »

Looks like one of those early 80s vintage reissues.
maxwell
Member
Posts: 361
Joined: Sun Dec 04, 2011 4:14 pm

Re: Need info on an inherited guitar.

Post by maxwell »

Well, it's got "320" written on the inside, first entry. I'm assuming it's a Rick 320:

https://www.guitar-list.com/rickenbacke ... backer-320


Measure the scale length, i.e., the distance of a string from nut to bridge (length between opposite contact points of a string). The 320 = 20.75 inches.
User avatar
libratune
Veteran RRF member
Posts: 4254
Joined: Mon Jul 29, 2002 9:06 am
Contact:

Re: Need info on an inherited guitar.

Post by libratune »

What are the numbers/letters stamped into the metal jackplate? That would help determine the date of mfg.

(the jackplate is on the side of the guitar near the controls)
User avatar
Ontario_RIC_fan
Advanced Member
Posts: 2794
Joined: Sat Dec 20, 2008 8:39 pm

Re: Need info on an inherited guitar.

Post by Ontario_RIC_fan »

Beta5788 wrote:I inherited this guitar and have been trying to find more info on it, but have not had much luck. In all the searching I have done thus far I have not seen another of the same, and have not found someone else who has. Any info would be greatly appreciated.

Thanks!
--Justin

That just means that you have not been looking in the right spot!

Here are pictures of 30 320 guitars made 1975-1981 exactly like yours.

http://www.rickresource.com/register/ga ... =0&month=0

There are only two MG examples we have collected so far - both from February 1976. Rickenbacker made them with the raised TRC, the high gains and the f hole between 1975 and 1982ish. So that gives you a rough idea of the date.

If you share the SN as Ron suggested we can date it to within a few weeks of its leaving the factory in Santa Ana California.

I own one of these guitars myself, although mine from August 1977 (QH3474) does not have the f-hole and is in the more common Jetglo Black.

If you intend to play it, you must put a heavier gauge of strings on it for it to intonate properly. RIC still makes a set that works perfectly, and is what I use on mine.
Last edited by Ontario_RIC_fan on Thu Apr 20, 2017 6:56 pm, edited 1 time in total.
Brian Morton
A Rickenbacker Fan
in Hamilton, Ontario, Canada
=========================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620
78 TR7
83 TR25
User avatar
Ontario_RIC_fan
Advanced Member
Posts: 2794
Joined: Sat Dec 20, 2008 8:39 pm

Re: Need info on an inherited guitar.

Post by Ontario_RIC_fan »

I notice that your deceased relative has moved the bridge so that it sits on an angle.

I bet this is because he tried to intonate it with a 10-42 standard Eletric guitar set.

The other thing to warn you about Rickenbackers of this vintage is that they have the old style hairpin truss rods. They DO NOT work like Gibson or Fender guitars, in that you can't adjust the neck by turning the truss rod nuts. Doing so frequently damages the guitar and can even pop the fretboard off.

Do a search here on this site on "Adjusting old style truss rods", and before you hand it to any service tech make sure you discuss this before hand..

One final observation - from the interior of the cavity there seems to be some evidence of the original finish which was likely Walnut (or as I call it Walnutglo). A rare finish for one of these guitars. The guitar player from the UK band Squeeze played a Walnutglo 320 for a few years in the early 1980s. I presume at some point the guitar was stripped to the maple.
Brian Morton
A Rickenbacker Fan
in Hamilton, Ontario, Canada
=========================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620
78 TR7
83 TR25
User avatar
leftybass
RRF Consultant
Posts: 5359
Joined: Sat Feb 03, 2001 10:23 am

Re: Need info on an inherited guitar.

Post by leftybass »

Without the number on the plate, it's still likely it's from 1975-'79. Nice 320.
Post Reply

Return to “Rickenbacker Guitars: by John Simmons”