Hey
1. Was wondering if there's a Rick 360/12 V or C series with a Neck Width at Nut 44.45 mm (1 3/4'') like the 660/12 has.
Maybe there's specific years they made them wider? if not, which other models has that wider neck width?
2. Does the 360/12v64 has the same neck thickness as the C63? I know that in the 60's the necks was thinner, are there any models or reissues with a thinner neck like the 60's guitars had?
Thanks!
Neck width
Moderators: rickenbrother, ajish4
Re: Neck width
The 1993 Plus might be the guitar for you, c63 looks with an added middle pickup and neck like the 660/12.
Re: Neck width
Thanks!
I wish it didn't have that middle pickup :/
Anyone knows about other models/years? with a thinner neck and wider width neck.
I wish it didn't have that middle pickup :/
Anyone knows about other models/years? with a thinner neck and wider width neck.
Re: Neck width
I'm not sure that is possible these days as the old, thin necks had straight channels for the old style truss rods, whereas to current, new style rods require a curved channel necessitating a thicker neck to accommodate them.doog wrote:...I know that in the 60's the necks was thinner, are there any models or reissues with a thinner neck like the 60's guitars had?
Thanks!
Re: Neck width
On V64's, the necks are thin from the 80's to about '94-'96. Then they get thick... thicker,... thickest around '05, and sometime in the late 2010's get thinner, but still not as thin as the 60's, or even the 80's. C63's: I've never owned one but I hear they are decent. Still probably not like an original.