Page 2 of 2

Re: .0047 Capacitor in 620

Posted: Wed Apr 11, 2018 3:16 am
by iiipopes
And then there is my 27-page vintage tone mod thread which has been going strong for over a decade on the RIC forum:
http://rickenbacker.com/forum/viewtopic.php?f=2&t=7928

My wiring diagram for 3-pickup guitars takes a part RIC only sold for a little while on their boutique before going with the bypass switch: a push-pull DPDT switch, installed on the 5th knob so it passes the "five foot" test. The benefits of my wiring diagrams are that not only do they pass the five-foot test, but all the controls retain their original functions in the "down" position of the push-pull, so nobody knows the difference until you want them to. Also, I never liked the mid-neck combination in the selector switch up position. I think it sounds insipid. So with one switch my wiring diagram fixes all that.

Send me a PM and an email address if anybody wants it, and I will email out a pdf.

Re: .0047 Capacitor in 620

Posted: Thu Aug 09, 2018 9:01 pm
by charlie chitlins
I'm new to Ricks, but old to guitars.
I know they're...different...but this is the 2nd thread I've seen here about caps where there is one more zero than I'm used to seeing.
I've soldered in many .047uf and .022uf caps, but never a .0047 or .0022.
Do Ricks really like these values?

Re: .0047 Capacitor in 620

Posted: Thu Aug 09, 2018 10:35 pm
by clementc3
There are .047 and .0047 capacitors:

viewtopic.php?f=2&t=415615&p=863122&hil ... 47#p863122

Re: .0047 Capacitor in 620

Posted: Fri Aug 10, 2018 1:08 am
by jps
charlie chitlins wrote:I'm new to Ricks, but old to guitars.
I know they're...different...but this is the 2nd thread I've seen here about caps where there is one more zero than I'm used to seeing.
I've soldered in many .047uf and .022uf caps, but never a .0047 or .0022.
Do Ricks really like these values?
They are not tone caps as you are thinking. The .0047µF cap used to be placed in-line with the bridge pickup on both the guitars and two pickup basses to act as a HPF on those pickups. Modern Ricks, starting sometime in the early to mid 1980s, do not have that cap.

Re: .0047 Capacitor in 620

Posted: Wed Aug 15, 2018 1:29 pm
by charlie chitlins
Eeeeeeenteresting!
If you check the DCR of a pickup at the output jack, does it read 0?

Re: .0047 Capacitor in 620

Posted: Wed Aug 22, 2018 10:20 am
by iiipopes
aceonbass wrote:When I build wiring harnesses for three pickup Ricks, I often run the neck and bridge pickups through the neck and bridge tone controls, and the middle pickup through the 5th knob rewired as just a volume control for that pickup.
Dane, have you tried my mods?

Re: .0047 Capacitor in 620

Posted: Wed Aug 22, 2018 11:12 am
by jps
IIRC, Wasn't it Howard Bishop who first converted the 5th knob to control the middle pickup many years ago? Great idea on his part.

Re: .0047 Capacitor in 620

Posted: Wed Aug 22, 2018 11:13 am
by aceonbass
iiipopes wrote:Dane, have you tried my mods?
I'm still waiting for a copy of your wiring diagram... :wink:

Re: .0047 Capacitor in 620

Posted: Mon Aug 27, 2018 2:56 pm
by iiipopes
aceonbass wrote:Back in the 60's Rick guitars had the .0047 cap just like the basses did. I've had a few customers request one activated by a push-pull pot. It's interesting that RIC brought this back on the basses, but not the guitars.
:mrgreen: