660/12 wider necks
Moderators: rickenbrother, ajish4
- Medicus1963
- Member
- Posts: 392
- Joined: Thu Nov 17, 2011 7:24 am
660/12 wider necks
Hey guys,
Does anyone know when they started to produce the wider neck on the Standard 660/12 like the Tom Petty model ?
Thanks
Peter
Does anyone know when they started to produce the wider neck on the Standard 660/12 like the Tom Petty model ?
Thanks
Peter
All you need is love and a rick !
Re: 660/12 wider necks
Well I bought a new Tom Petty Limited Edition in 1991 and I believe that was the start. It was TP that helped in the design of his guitar. There was a run of 1000 which included some left handed models and in a choice of Fireglo and Jetglo. The Fireglo models were in birdseye maple.
Re: 660/12 wider necks
Andyeknobs, you’re correct. When mr. Petty was approached about a sig model, he requested a wider neck.
Originally called the TP model, after the initial run of 1000 TP’s were made, Rick continued to make them, calling them 660’s.
Originally called the TP model, after the initial run of 1000 TP’s were made, Rick continued to make them, calling them 660’s.
- Ontario_RIC_fan
- Advanced Member
- Posts: 2796
- Joined: Sat Dec 20, 2008 8:39 pm
Re: 660/12 wider necks
The only difference between a 660/12 and the Tom Petty Signature Edition, is the top pick guard.
The 660/6 is the same as above, but with six fewer strings.
How RIC finishes them these days is very different than back in the 1990s.
The 660/6 is the same as above, but with six fewer strings.
How RIC finishes them these days is very different than back in the 1990s.
Brian Morton
A Rickenbacker Fan
in Hamilton, Ontario, Canada
=========================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 MG 450
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620
78 TR7
83 TR25
A Rickenbacker Fan
in Hamilton, Ontario, Canada
=========================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 MG 450
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620
78 TR7
83 TR25
- Medicus1963
- Member
- Posts: 392
- Joined: Thu Nov 17, 2011 7:24 am
Re: 660/12 wider necks
Thank you guys for all your input,
Now i have my 660/12 back and it has the wider neck!!
Originally it had the Hot Toasters which i changed into scatter wounds which sounds much better.
then i changed the strings to TI flat wounds and made a little setup. Now it is perfect for me.
still thinking about the vintage tone cap.
greetings from Germany
Peter
Now i have my 660/12 back and it has the wider neck!!
Originally it had the Hot Toasters which i changed into scatter wounds which sounds much better.
then i changed the strings to TI flat wounds and made a little setup. Now it is perfect for me.
still thinking about the vintage tone cap.
greetings from Germany
Peter
All you need is love and a rick !
Re: 660/12 wider necks
PM me for my wiring diagram where I have a push-pull on the 5th knob for the tone cap in or out.Medicus1963 wrote:Thank you guys for all your input,
Now i have my 660/12 back and it has the wider neck!!
Originally it had the Hot Toasters which i changed into scatter wounds which sounds much better.
then i changed the strings to TI flat wounds and made a little setup. Now it is perfect for me.
still thinking about the vintage tone cap.
greetings from Germany
Peter
Re: 660/12 wider necks
Does anyone know when they switched from the hot toasters to to he scatter wound toasters in 1999? I have a 660/12 FG that was made the 11th week of 1999, March if 1999. I have a 325/12v63 that has scatter wounds, but can’t recall the month it was made off hand.
325c64 JG,325c58 JG, 325/12v63 JG, 350v63 JG, 1996 FG, 360/12c63 FG, 360/6 Carl Wilson FG, 1993Plus FG, 660/12 FG, 425 FG (1965), 360/12 FG (1965/67)
Re: 660/12 wider necks
Mike I am going to say the 7.4 k toasters showed up very close to December 1999. The historians may prove me wrong but I recall their introduction on the 425 and 450V63 reissues in December 1999 and also in the Carl Wilson signature model around May 2000. I suspect the Factory was checking them out prior to December 1999. John Hall where are you?
Life, as with music, often requires one to let go of the melody and listen to the rhythm
Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Re: 660/12 wider necks
Thanks, I’m guessing the 660/12 has the hot toasters since it was made in early 1999. I received my 325/12v63 in early 2000 but it is dated dec 1999.admin wrote:Mike I am going to say the 7.4 k toasters showed up very close to December 1999. The historians may prove me wrong but I recall their introduction on the 425 and 450V63 reissues in December 1999 and also in the Carl Wilson signature model around May 2000. I suspect the Factory was checking them out prior to December 1999. John Hall where are you?
325c64 JG,325c58 JG, 325/12v63 JG, 350v63 JG, 1996 FG, 360/12c63 FG, 360/6 Carl Wilson FG, 1993Plus FG, 660/12 FG, 425 FG (1965), 360/12 FG (1965/67)
Re: 660/12 wider necks
Does your toasters have phillips or slotted screws in the four corners? And do the black "toaster bars" have a round moulding dimple at each end (four in total)? Those can determine what you have, beyond the sound and output level of the pickups (or measuring them with an ohm meter).mike_d wrote:Thanks, I’m guessing the 660/12 has the hot toasters since it was made in early 1999. I received my 325/12v63 in early 2000 but it is dated dec 1999.