I have one of each of these amps. If I wanted to run one* instrument through both amps simultaneously, shy of getting a splitter box, would I run a jumper from one amp's input to the input of the other? What are the options?
* Non-Rick-O-Sound. That of course is another option. For the sake of this let's say it's a regular mono-output instrument.
TR35B & TR120B - channel jumping?
Moderators: rickenbrother, ajish4
- kennyhowes
- Veteran RRF member
- Posts: 4908
- Joined: Sat Jan 27, 2001 1:03 am
- Contact:
Re: TR35B & TR120B - channel jumping?
I take it these amps have two inputs going to the channel? If they are like those on Fender amps, for example, yes, you can take the second input and run a cable from it to the other amp's input.
- kennyhowes
- Veteran RRF member
- Posts: 4908
- Joined: Sat Jan 27, 2001 1:03 am
- Contact:
Re: TR35B & TR120B - channel jumping?
Yep, two inputs on each amp. Also pre-amp in and out jacks.
Re: TR35B & TR120B - channel jumping?
If you only need one set of tone controls then you could go from the pre out of one amp into the power amp in on the other; this way you only have to deal with one volume control, too. I'd try both ways and see what flies for you.
- kennyhowes
- Veteran RRF member
- Posts: 4908
- Joined: Sat Jan 27, 2001 1:03 am
- Contact:
Re: TR35B & TR120B - channel jumping?
Works for me! Thanks y'all!