Strings - 330/12

Modern years of Rickenbacker Guitars from 1984 to the present

Moderators: rickenbrother, ajish4

Post Reply
ST01
New member
Posts: 6
Joined: Sat Jul 27, 2013 9:55 am

Strings - 330/12

Post by ST01 »

What string brand and gauge has everyone been most happy with overall? I have been going back and forth on the Ric 10-46's and D'Addario EXL150's. Also, the Schaller's sure are sloppy!
User avatar
krick
Veteran RRF member
Posts: 2067
Joined: Sun May 06, 2001 2:09 pm
Contact:

Re: Strings - 330/12

Post by krick »

I have found that any of the 12 string sets listed here work well:

http://www.pickofthericks.com/categorie ... r-Strings/

My favorite ones are the T-I Custom Flat Wound set. They sound great, feel great, and seem to last forever.
User avatar
teb
Advanced Member
Posts: 1532
Joined: Sun Jul 17, 2005 7:39 pm

Re: Strings - 330/12

Post by teb »

Same here, TI Jazz Flats on both my 370/12 and 340/12. I doubt I'll ever use anything else on them again - and at the rate they're going (three years plus on the guitar I play the most) I may not need to think about it for quite a while.
JakeK
RRF Consultant
Posts: 5757
Joined: Sun Nov 25, 2007 9:08 pm

Re: Strings - 330/12

Post by JakeK »

Another vote for TI Flats here. They have low tension, last a while and are quite bright for flatwounds. They don't add that extra stress on the neck that other types of flats seem to do. I don't use anything else on my 12-string.
Folkie
Advanced Member
Posts: 1605
Joined: Sat Jan 02, 2010 1:23 pm

Re: Strings - 330/12

Post by Folkie »

I guess what Todd said in an earlier post rings true (as it were). Flatwound strings dull the sound of the low course and accentuate the sound of the octave. The result is more chime and a more authentic sixties vibe. As for longevity, TI's last longer than any string set I've used on any of my guitars. Which is enough to make the $40 a set price tag look like a real bargain. :!:
ST01
New member
Posts: 6
Joined: Sat Jul 27, 2013 9:55 am

Re: Strings - 330/12

Post by ST01 »

TI Flatwounds 10-44. Expensive! I will have to give them a try. Thanks for the unanimous recommendation.

Since my 330/12 came with Schaller Mini M6 machines, any suggestion on a more accurate replacement that would not involve drilling? Maybe I just got a lame set.

Thanks again all.
User avatar
iiipopes
Intermediate Member
Posts: 1428
Joined: Tue May 22, 2007 5:02 pm

Re: Strings - 330/12

Post by iiipopes »

ST01 wrote:TI Flatwounds 10-44. Expensive! I will have to give them a try. Thanks for the unanimous recommendation.

Since my 330/12 came with Schaller Mini M6 machines, any suggestion on a more accurate replacement that would not involve drilling? Maybe I just got a lame set.

Thanks again all.
Make sure you clean the tuners, install the strings so there are only a few neat wraps around the post from top to bottom, without kinking, binding or overlapping, and always tune up from flat to pitch so even tension is maintained.
User avatar
cestlamort
Junior Member
Posts: 135
Joined: Sat Jan 30, 2010 10:57 pm

Re: Strings - 330/12

Post by cestlamort »

Do the TI ones pair well with the hi-gains, too?
User avatar
teb
Advanced Member
Posts: 1532
Joined: Sun Jul 17, 2005 7:39 pm

Re: Strings - 330/12

Post by teb »

just fine
PeterJ
New member
Posts: 15
Joined: Sun Nov 14, 2010 6:02 pm

Re: Strings - 330/12

Post by PeterJ »

Hi,

I use sets of singles based on the gauges of the light Dean Markley electric set:

2581 LT .009/.009 .011/.011 .016/.008 .024/.010 .032/.016p .042/.022

I will change the low G from a 16 to a 17 or 18.

I buy GHS flats or D'Addario Chromes for the wound strings and D'Addarios for the plains. I also prefer a plain on the octave E (or string 11 counting from high to low).

I play .010s on my six strings and find that gauge in a 12 set too heavy.

PJ
Post Reply

Return to “Rickenbacker Guitars: Modern Years - After 1983”