Hi all,
I just want to give you some pictures how i solved the problem.
My Bigsby Bridge was too high, i only had an action over the 12 fret on low and high E more than 3 mm ! So i filed down the edges of the bridge for the radius of the height adjustment screws. This solved the problem !! Action is now 2 mm.
Next problem was slipping strings. On my other 325 with compressed round wounds , it is not a problem. Strings stay in place, only because of their tension. But with flatwounds this did not work. So after strumming hard in the Lennon way, the strings slip and make a sort of "meeting" in the middle of the bridge! So i filed out slots for the strings and polished the slots to prevent string braking and friction.
Voila, wonderful players guitar.
I hope i described the process precisely enough, for this is difficult with my poor school english. Maybe I could help some people which have the same problem.
Thanks
Peter
Bigsby Bridge Height and string slipping problem
Moderator: jingle_jangle
- Medicus1963
- Member
- Posts: 392
- Joined: Thu Nov 17, 2011 7:24 am
- Medicus1963
- Member
- Posts: 392
- Joined: Thu Nov 17, 2011 7:24 am
Re: Bigsby Bridge Height and string slipping problem
Hi,
any comments or suggestions to do it better? Please feel free to participate.
thanks
Peter
any comments or suggestions to do it better? Please feel free to participate.
thanks
Peter
All you need is love and a rick !