Vintage pickguard queston
Moderators: rickenbrother, ajish4
Vintage pickguard queston
I'm looking at the Pickguardian website trying to decide if I want the vintage rear painted plexi guard for my 2016 4003S, but the example that they show on the website isnt very good. I know Tony does great work, and I have bought his guards before, but the example is terrible. Does anyone here have one of these installed on their newer 4003 or 4003S? If so, could you post a picture please??
Thanks.
Thanks.
"Knowledge is Power"
Re: Vintage pickguard queston
Hi Scott,
Not a recent 4003, but here are pics of the back-painted, clear plexi PG which Tony made for my MG 4000. I pulled the original order form from the file: this example uses "standard white" paint and a "rounded over" edge bevel. I also specified to countersink all mounting holes and omit holes for the tug bar.
Hope this helps.
D~
Not a recent 4003, but here are pics of the back-painted, clear plexi PG which Tony made for my MG 4000. I pulled the original order form from the file: this example uses "standard white" paint and a "rounded over" edge bevel. I also specified to countersink all mounting holes and omit holes for the tug bar.
Hope this helps.
D~
Re: Vintage pickguard queston
Here are photos of the vintage back painted plexi pickguard Tony made for my old '04 4003FL.
Re: Vintage pickguard queston
Thanks Jeff. He made me one for the '88 V63 that I had, and it was great, top notch quality. But I'm looking for a pic of a modern 4003 with the 1" neck pickup spacing with the vintage guard.
Im just not sure how it will look with the 1" spacing.
Im just not sure how it will look with the 1" spacing.
"Knowledge is Power"
Re: Vintage pickguard queston
The 1" spacing will be what it is. The photo (I think) you are referring to on Tony's site is essentially a mash up of a mid '00s shaped pickguard with a longer section added on to it so that does look a bit incongruous. Not that RIC is back to making the pickguard looking far more like the classic shape of the '70s version (with a couple of "modern" curves/shapes still on it, primarily the corner by the E string side near the pickup surround) it could look a lot better if he makes those changes to it. As you are not far from Columbus you could (with bass in hand) visit with Tony, then he could work his magic and make it just like you want it to look and fit.
Re: Vintage pickguard queston
What pic are you looking at that you don't like? Linky?
Re: Vintage pickguard queston
this pic:
http://www.pickguardian.com/product/ric ... ***-guard/
Just looking for a pic of one with the correct screw holes, without the plastic pickup cover thingy.
http://www.pickguardian.com/product/ric ... ***-guard/
Just looking for a pic of one with the correct screw holes, without the plastic pickup cover thingy.
"Knowledge is Power"
Re: Vintage pickguard queston
I bought one for my 2015 4003S,, that has 1/2" spacing (the guard, not the bass!) but may not install out of fear of opening up that cavity so close to the edge of the body. It looks great. I'm still unclear what you don't like about that pic... I imagine sunlight may not have been the best environment to capture how that kind of guard really looks.
- antipodean
- Senior Member
- Posts: 3182
- Joined: Wed Jan 09, 2008 1:27 am
Re: Vintage pickguard queston
Plug the hole and rerout might be the only way to go..... or sell the guard and get a new one with 1" spacing....jdogric12 wrote:I bought one for my 2015 4003S,, that has 1/2" spacing (the guard, not the bass!) but may not install out of fear of opening up that cavity so close to the edge of the body. It looks great. I'm still unclear what you don't like about that pic... I imagine sunlight may not have been the best environment to capture how that kind of guard really looks.
"I don't want to sound incredulous but I can't believe it" Rex Mossop
Re: Vintage pickguard queston
Don't be a chicken.jdogric12 wrote:I bought one for my 2015 4003S,, that has 1/2" spacing (the guard, not the bass!) but may not install out of fear of opening up that cavity so close to the edge of the body.
Re: Vintage pickguard queston
I bought the bass for one gig that's now in the rear view mirror, so I think I might just try to sell it. The 2030GF is such a great bass I don't really feel I'd need the 4003S unless I do more Genesis gigs... which I don't see happening any time soon.
Here it is. It's got a fake plexi TRC, toaster, horseshoe, notched tailpiece, vintage-style strap buttons, and been "Rutherford-ized" meaning the tone knobs removed, and the volume knobs replaced with chicken head knobs. I also got a tugbar for it, but if I don't install the guard I won't do the tugbar either, obviously.
https://www.youtube.com/watch?v=Ejs00-dmuaI
Here it is. It's got a fake plexi TRC, toaster, horseshoe, notched tailpiece, vintage-style strap buttons, and been "Rutherford-ized" meaning the tone knobs removed, and the volume knobs replaced with chicken head knobs. I also got a tugbar for it, but if I don't install the guard I won't do the tugbar either, obviously.
https://www.youtube.com/watch?v=Ejs00-dmuaI