Vintage Pickup Question?

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
cheyenne
Veteran RRF member
Posts: 6231
Joined: Fri Feb 16, 2001 11:39 am

Vintage Pickup Question?

Post by cheyenne »

Im thinking of dropping a toaster and Horseshoe in my 4003S. Will these pickups retrofit with the existing harness with the push pull pot? or are their mods that need to be done?
"Knowledge is Power"
User avatar
jdogric12
Rick-a-holic
Posts: 10854
Joined: Thu Dec 29, 2005 6:00 am

Re: Vintage Pickup Question?

Post by jdogric12 »

I have a 2015 4003S FG with a toaster and horsie - they work great! "Rutherford-ized" it... even bought the guard for 1/2" spacing to match this one's screw holes, but I'm too afraid to dremel out that neck cavity in case the neck buckles. Here it is:

I got bonus points for using actual Dewtron Mister Bassman pedals! (last note only on this song)

https://www.youtube.com/watch?v=Ejs00-dmuaI

User avatar
bassduke49
Senior Member
Posts: 6553
Joined: Wed May 14, 2003 5:00 am

Re: Vintage Pickup Question?

Post by bassduke49 »

Nice wig! Or are those implants? :mrgreen:
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
User avatar
jdogric12
Rick-a-holic
Posts: 10854
Joined: Thu Dec 29, 2005 6:00 am

Re: Vintage Pickup Question?

Post by jdogric12 »

Transplants from another area on my body!
User avatar
bassduke49
Senior Member
Posts: 6553
Joined: Wed May 14, 2003 5:00 am

Re: Vintage Pickup Question?

Post by bassduke49 »

jdogric12 wrote:Transplants from another area on my body!
KELLY CLARKSON! :lol: :lol: :lol:
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
User avatar
cheyenne
Veteran RRF member
Posts: 6231
Joined: Fri Feb 16, 2001 11:39 am

Re: Vintage Pickup Question?

Post by cheyenne »

So,,,,anyway, do the pickups retrofit? or are mods to the harness necessary??? :?:
"Knowledge is Power"
User avatar
jps
RRF Consultant
Posts: 37139
Joined: Wed Feb 12, 2003 6:00 am

Re: Vintage Pickup Question?

Post by jps »

Other will probably chime in and say you need to replace the wiring harness, or at least the caps and pots to different values. My experience is that you don't need to do anything other than solder the new pickups in and it will sound great (once you do the usual setup).
User avatar
cheyenne
Veteran RRF member
Posts: 6231
Joined: Fri Feb 16, 2001 11:39 am

Re: Vintage Pickup Question?

Post by cheyenne »

Thanks Jeff.
"Knowledge is Power"
User avatar
jdogric12
Rick-a-holic
Posts: 10854
Joined: Thu Dec 29, 2005 6:00 am

Re: Vintage Pickup Question?

Post by jdogric12 »

Yep. You can just wire 'em up. Replace pots for different values to taste. It's really only the HB's that are way off... hi-gains and toasters and horses all play nice together, or at least they have in my experience.
User avatar
aceonbass
Veteran RRF member
Posts: 6650
Joined: Tue Jul 09, 2002 5:00 am
Contact:

Re: Vintage Pickup Question?

Post by aceonbass »

jps wrote:Other will probably chime in and say you need to replace the wiring harness, or at least the caps and pots to different values. My experience is that you don't need to do anything other than solder the new pickups in and it will sound great (once you do the usual setup).
Yes, you CAN use the existing 330k pots (which are usually closer to 20% off on the low side), but the tone will not have the same brightness or clarity as a 500k tone, which was the rated value RIC used up until the early-mid 90's on their tone pots. 275-330k pots do NOT sound the same when dimed. This is based on my experience, having wired hundreds of guitars and basses, most of which are Rickenbackers.
User avatar
jps
RRF Consultant
Posts: 37139
Joined: Wed Feb 12, 2003 6:00 am

Re: Vintage Pickup Question?

Post by jps »

I've never had a longing for more brightness on any of my Ricks outside of the '04 Cii I had, but that may be down to that 4004 being my first exposure to HB-1s and their somewhat different tonality. When I subsequently tried a 4004 Laredo I found it sound considerably brighter than the Cii (not certain why that was, though).
teeder
Senior Member
Posts: 6311
Joined: Wed Apr 14, 2004 5:00 am

Re: Vintage Pickup Question?

Post by teeder »

When I subsequently tried a 4004 Laredo I found it sound considerably brighter than the Cii (not certain why that was, though).
IIRC, the Laredo is solid maple and the Cii had walnut, but I could be wrong.
User avatar
squirebass
Veteran RRF member
Posts: 1562
Joined: Fri Oct 13, 2000 11:05 pm

Re: Vintage Pickup Question?

Post by squirebass »

bassduke49 wrote:
jdogric12 wrote:Transplants from another area on my body!
KELLY CLARKSON! :lol: :lol: :lol:
I've watched the video three or four times, but I just don't see Kelly Clarkson in dere! :? :? :?

Frankly, I think it is better off without her!

Oh, and I love that 4003S!
User avatar
bassduke49
Senior Member
Posts: 6553
Joined: Wed May 14, 2003 5:00 am

Re: Vintage Pickup Question?

Post by bassduke49 »

I was obliquely referring to a scene from "The 40-Year-Old Virgin" where Steve Carrel's character is having his chest hair removed. At the first pull of the fuzz, he screams out "Kelly Clarkson" for no apparent reason. So, Jason's wig/hair from another part of his body . . . eh, too oblique, I guess. :|
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
User avatar
ilan
RRF Consultant
Posts: 2902
Joined: Thu Jun 13, 2002 7:00 pm

Re: Vintage Pickup Question?

Post by ilan »

I have reissue horseshoe and toaster on my '73 (click the link in my signature to see pic) and man does that bass sound fantastic. The only mod needed is drilling 4 new holes for the surround.
"A Noble Instrument Must Be Nobly Regarded"
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”