New Bass Day! RMH1999
Moderators: rickenbrother, ajish4
New Bass Day! RMH1999
I couldn't be happier with it! Nice size neck and really resonant wood. Very even string response. This is one of those good ones. I'm feeling very thankful right now!
Special thanks go out to Dane Wilder for the vintage surround and electronics, and Tony at Pickguardian for the PERFECT pickguard.
NOTE: I didn't get the model number wrong, RMH are my initials, so I'm just having a little fun!
Special thanks go out to Dane Wilder for the vintage surround and electronics, and Tony at Pickguardian for the PERFECT pickguard.
NOTE: I didn't get the model number wrong, RMH are my initials, so I'm just having a little fun!
Last edited by Royce on Mon Oct 29, 2018 5:25 am, edited 2 times in total.
Thankful to be included
Re: New Bass Day! RMH1999
Beautiful!
Re: New Bass Day! RMH1999
Thanks wim, that means a lot coming from you! I used to have a 2003 C64, but this beats it in every way. I feel silly because I can't stop looking at it!
Thankful to be included
Re: New Bass Day! RMH1999
GREAT look! Love it! Congratulations.... !!!
The only thing we can perceive are our perceptions - George Berkeley
- bassduke49
- Senior Member
- Posts: 6553
- Joined: Wed May 14, 2003 5:00 am
Re: New Bass Day! RMH1999
So did you have a newish 4003S backdated with hardware? Or is this a tweaked V63? Curious minds . . . etc.
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
Re: New Bass Day! RMH1999
Very cool! Looks like a modern S.
I have all the parts to do the same to my '15 S but haven't yet been brave enough to route the modern cavity, since there is less wood and it would be weaker than an older design.
You still need the vintage strap buttons! If you have the original tailpiece, you can just use the mute buttons - same part IIRC.
I have all the parts to do the same to my '15 S but haven't yet been brave enough to route the modern cavity, since there is less wood and it would be weaker than an older design.
You still need the vintage strap buttons! If you have the original tailpiece, you can just use the mute buttons - same part IIRC.
Re: New Bass Day! RMH1999
Thanks Tim!ram wrote:GREAT look! Love it! Congratulations.... !!!
Thankful to be included
Re: New Bass Day! RMH1999
DOH!..I just realized I didn't say what I started with! It's a 2015 4003s. It took me longer to do than I thought it would, as I just couldn't bring myself to route for the 1/2" toaster position! (nerve wracking) By the way Paul, THANK YOU for the wonderful book. It's sitting here right next to me on the desktop.bassduke49 wrote:So did you have a newish 4003S backdated with hardware? Or is this a tweaked V63? Curious minds . . . etc.
Thankful to be included
Re: New Bass Day! RMH1999
It's a 2015 model like yours!..I know what you mean about the routing..In it's first revision I tried to leave the pickup where it was, but it bothered me every time I looked at it. In the end though, it was easier than I imagined, and I really didn't have to remove much wood at all. What I did was, leave the front two screws off the toaster so I could remove as little wood as possible. There's still more wood left than there is in a C64 or V63, so it should be OK. I forgot about the strap buttons! (good eye!)jdogric12 wrote:Very cool! Looks like a modern S.
I have all the parts to do the same to my '15 S but haven't yet been brave enough to route the modern cavity, since there is less wood and it would be weaker than an older design.
You still need the vintage strap buttons! If you have the original tailpiece, you can just use the mute buttons - same part IIRC.
Thankful to be included
Re: New Bass Day! RMH1999
That's pretty clever, leaving the 2 screws off! This is very encouraging. Thanks for posting such excellent pics. I'm going to try this on mine. Do you think I"ll be able to Dremel it? Getting access to a router (and someone that knows how to use one) would be difficult.
- bassduke49
- Senior Member
- Posts: 6553
- Joined: Wed May 14, 2003 5:00 am
Re: New Bass Day! RMH1999
You're quite welcome! Thank you for purchasing one!Royce wrote:By the way Paul, THANK YOU for the wonderful book. It's sitting here right next to me on the desktop.
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
Re: New Bass Day! RMH1999
Router not required. Dremel should work fine but be aware of it not staying where you want it to during the operation. When I did mine I used very simple tools: a drill with the appropriate diameter bit size for the corners and a nice, sharp chisel and medium weight hammer. Excellent control that way.jdogric12 wrote:That's pretty clever, leaving the 2 screws off! This is very encouraging. Thanks for posting such excellent pics. I'm going to try this on mine. Do you think I"ll be able to Dremel it? Getting access to a router (and someone that knows how to use one) would be difficult.
Re: New Bass Day! RMH1999
BTW, the ultimate Dremel attachment tool for guitar repair is this:jps wrote:Router not required. Dremel should work fine but be aware of it not staying where you want it to during the operation. When I did mine I used very simple tools: a drill with the appropriate diameter bit size for the corners and a nice, sharp chisel and medium weight hammer. Excellent control that way.jdogric12 wrote:That's pretty clever, leaving the 2 screws off! This is very encouraging. Thanks for posting such excellent pics. I'm going to try this on mine. Do you think I"ll be able to Dremel it? Getting access to a router (and someone that knows how to use one) would be difficult.
https://www.stewmac.com/Luthier_Tools/T ... _Base.html
I don't usually promote Stew Mac products, but I've had this for years and it's fantastic for doing very fine work with excellent control over everything. You can even route for binding with this, if you set up a jig.
Anyway, nice conversion work on the bass. Looks excellent!
Re: New Bass Day! RMH1999
Thanks Collin! Gonna seriously consider that.
Re: New Bass Day! RMH1999
OK so there is a local guy who works on a lot of my guitars and basses, and he just told me he owns this Dremel thingy Collin linked. So I'm just gonna have him do it, which makes sense for many reasons!