CS/V63 stereo conversion

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Re: CS/V63 stereo conversion

Postby (soundcity5150) » Fri May 03, 2019 4:20 pm

I also believe it was done afterwards.
By the way... Which number has yours ?
Mine is #189 from '91.
New member
Posts: 19
Joined: Wed Apr 26, 2017 8:42 am

Re: CS/V63 stereo conversion

Postby (cassius987) » Sat May 04, 2019 12:58 pm

jdogric12 wrote:Dane here does a thing where a push/pull pot can make a single jack work for mono or stereo.

I've always wondered about doing something like that. All you really need is a switch that can interrupt a bridge for the two channels, I think? Great idea to use a push-pull pot.
User avatar
Senior Member
Posts: 4646
Joined: Mon Aug 04, 2008 3:11 pm

Re: CS/V63 stereo conversion

Postby (aceonbass) » Sat May 04, 2019 1:46 pm

Not exactly. Interrupting the jumper wire between the two volume pots will kill your neck pickup signal. I use an SPDT push-pull pot that reroutes the jumper wire signal from going to the extra prong on the stereo jack to the output lug on the bridge volume in default mode. The function can be reversed so that the stereo mode is the in/default mode as well.
User avatar
Veteran RRF member
Posts: 6513
Joined: Tue Jul 09, 2002 6:00 am
Location: Parkville, Missouri


Return to Rickenbacker Basses: by Joey Vasco & Tony Cabibe

Who is online

Users browsing this forum: No registered users and 2 guests