New Member, Questions About Rickenbacher Steel

Exploring the beauty and tone of Rickenbacker Lap Steels

Moderators: rickenbrother, ajish4

Post Reply
axe_78th
New member
Posts: 2
Joined: Thu Nov 30, 2006 10:50 am

New Member, Questions About Rickenbacher Steel

Post by axe_78th »

Greetings,
New member here. I am a partner in a small music store in Starkville, MS. http://backstagemusic.com/
We have a steel I believe to be a post war model B he wants to sell. I need help with the dating of it and also with what might be a proper asking price. This seemed like the place to find the answers. I have posted some pics on our store server.
http://backstagemusic.com/rick1.jpg
http://backstagemusic.com/rick2.jpg
http://backstagemusic.com/rick3.jpg
http://backstagemusic.com/rick4.jpg
http://backstagemusic.com/rick5.jpg

I looked at the pots was the numbers were unfamiliar to me for a date code. They are 24171-5-5212 on both pots. The pickup is 1.25 inches and the bridge is telling me post war I think. There are 5 inlays missing and there is no case. Any info any of you could give on dating would be helpful, as I know very little about these. A suggested value would be great as well. Thanks in advance for your time.
User avatar
doctorwho
Veteran RRF member
Posts: 12522
Joined: Tue Jun 11, 2002 3:28 pm

Post by doctorwho »

Welcome to the Forum, Tony. I'm not an expert in steels, but I do have the two main Rickenbacker reference books and I'll take a quick gander a little later to see if I can run down the model designation.

As far as the pot codes, could you confirm that the first three numbers are "241" and not "214"? The latter would be a code for IRC, and I've seen tough-to-decipher IRC pot codes before.
It is better, of course, to know useless things than to know nothing. - Seneca
rshatz
RRF Consultant
Posts: 466
Joined: Sat Sep 16, 2000 11:31 am

Post by rshatz »

Very interesting!
Logo is pre WW2 and I think the neck is also.
Pickup and body are postwar.
The black plates were started prewar and might have been continued after the war. I'm not sure.
There were no pot codes before WW2.
So, it is either a hybrid or a transitional model made with left over prewar and new postwar parts.
If the neck is prewar it should have a serial number stamped into the top of the headstock. (Usually C####)
There were no serial numbers on early postwar models.
If the serial number is very high, it could be transitional, but my guess is that the body and neck didn't leave the factory at the same time.
Please post the serial number, if it's there, or if there is none.
axe_78th
New member
Posts: 2
Joined: Thu Nov 30, 2006 10:50 am

Post by axe_78th »

There is not a serial number.
rshatz
RRF Consultant
Posts: 466
Joined: Sat Sep 16, 2000 11:31 am

Post by rshatz »

Since there is no s/n on the top of the headstock indicates this Model B is a an early postwar issue. The only prewar part is the logo.

If it sounds really good it might be worth $1000.
On Ebay sight-unseen $600-800.
However, the price of these is escalation. It might be worth more to the right player or collector.
User avatar
mp_me
Junior Member
Posts: 198
Joined: Mon Sep 12, 2005 5:35 pm

Post by mp_me »

purchased this steel for $600....waiting for UPS
User avatar
mp_me
Junior Member
Posts: 198
Joined: Mon Sep 12, 2005 5:35 pm

Post by mp_me »

SOUNDS GREAT.....I messed around with some tunings and found a few I liked.....
I played nice and quiet for a while....then after I got the hang of it.....cranked up my little 16w Soldano.....this thing SCREAMS!!!!!!
Powerful....Punchy....great.....
Then my downstairs neighbor started pownding on her ceiling....
User avatar
jdogric12
Rick-a-holic
Posts: 10854
Joined: Thu Dec 29, 2005 6:00 am

Post by jdogric12 »

Isn't it the growlingest pickup you've ever heard? I love the one I just got.
Post Reply

Return to “Rickenbacker Steels: by Richard Shatz”