Rickenbacker Lap Steels - Single neck

Exploring the beauty and tone of Rickenbacker Lap Steels

Moderators: rickenbrother, ajish4

Post Reply
User avatar
jsm610
Intermediate Member
Posts: 1072
Joined: Mon Apr 19, 2004 5:00 am
Contact:

Rickenbacker Lap Steels - Single neck

Post by jsm610 »

I've been reading up on the old Rickenbacker single-neck lap steels, and wanted to see if I've seen all of the different models they made. So far I've got:
A-22
A-25
Model B
Model BD
Model 59
Model NS, Model 100, Silver Hawaiian - Pre war (these are all the same thing?)
Model NS, Model S post-war (again, these are the same?)
Model SD
Model G, Deluxe Silver Hawaiian
Academy
Ace
Bronson Model 53
Model SW
Model 105

What am I missing?

Thanks!
Image
rshatz
RRF Consultant
Posts: 466
Joined: Sat Sep 16, 2000 11:31 am

Post by rshatz »

A-22
A-25
Model B
Model BD
Model 59
Model NS, Model 100, Silver Hawaiian - Pre war (these are all the same thing?) YES
Model NS, Model S post-war (again, these are the same?) YES
Model SD
Model G, Deluxe Silver Hawaiian
Academy
Ace
Bronson Model 53 ACTUALLY Model 52 Melody King. This model made of Brown Bakelite is identical to the BD.
Model BD
Model SW
Model 105 THIS IS PART OF THE 100 SERIES.

What am I missing?
Model CW
Jerry Byrd Model

That's all the models I know.
User avatar
jsm610
Intermediate Member
Posts: 1072
Joined: Mon Apr 19, 2004 5:00 am
Contact:

Post by jsm610 »

Thanks Richard!

A couple questions:
- Are the CW & Byrd models considered lap steels? - I thought since they had legs they would not be...
- Also, are the CW & Byrd models the same? Other than the fabric on the front?
- Are there other models in the 100 series?
rshatz
RRF Consultant
Posts: 466
Joined: Sat Sep 16, 2000 11:31 am

Post by rshatz »

John,
You're correct. The Byrd and CW were consoles and the same except for the fabric.
The 100 series consists of the 100, 102 and 105. There might be others. I'll check my references and get back to you later. The 100s were basically the same guitar with different finishes and headstock configurations.
I just remembered one other lap steel, the J-6, which was also made in an 8-string, the J-8.
Post Reply

Return to “Rickenbacker Steels: by Richard Shatz”