Please help me ID this bakelite

Exploring the beauty and tone of Rickenbacker Lap Steels

Moderators: rickenbrother, ajish4

Post Reply
Curly
New member
Posts: 4
Joined: Fri Jun 20, 2014 4:38 pm

Please help me ID this bakelite

Post by Curly »

I've owned this for about 20 years. I've always thought it was a Post War B6. However, I couldn't find any serial # or identifying number. I even checked the pots, but the date code didn't help me (24171-5 5212 ?).
So, here is a pic:
http://i1301.photobucket.com/albums/ag1 ... 500e78.jpg
User avatar
libratune
Veteran RRF member
Posts: 4254
Joined: Mon Jul 29, 2002 9:06 am
Contact:

Re: Please help me ID this bakelite

Post by libratune »

This looks like a model B with black panels.

Is the pickup magnet 1.5" or 1.25" wide? Makes a difference as to dating.
Last edited by libratune on Fri Jun 20, 2014 7:47 pm, edited 1 time in total.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Please help me ID this bakelite

Post by jps »

Given the pickup surround I'd say it is 1 1/4".
Curly
New member
Posts: 4
Joined: Fri Jun 20, 2014 4:38 pm

Re: Please help me ID this bakelite

Post by Curly »

yes, it's a 1-1/4" pickup
User avatar
libratune
Veteran RRF member
Posts: 4254
Joined: Mon Jul 29, 2002 9:06 am
Contact:

Re: Please help me ID this bakelite

Post by libratune »

With a 1 1/4" pickup, it would be a post-war Model B. Through 1950, post-war Model B steels had a "T" logo on the peghead with "Electro" spelled vertically. Yours does not.

My best guess based on the photo is that yours is a circa 1950-55 Model B.
Curly
New member
Posts: 4
Joined: Fri Jun 20, 2014 4:38 pm

Re: Please help me ID this bakelite

Post by Curly »

thanks ... I suppose it's possible that the pot code I couldn't figure out might be from late '52 then, since it ends with '5212'

the other thing that throws me though, is the headplate logo has the old spelling: "Rickenbacher"
User avatar
libratune
Veteran RRF member
Posts: 4254
Joined: Mon Jul 29, 2002 9:06 am
Contact:

Re: Please help me ID this bakelite

Post by libratune »

After the "T" logo was discontinued, leftover small plate logos with the old "Rickenbacher" spelling were used on the Model B until that model was discontinued in 1955.

Here is a photo of the headstock of a 1951 Model B showing the small plate logo. Is this what yours looks like?
1-fullsize.jpg
Curly
New member
Posts: 4
Joined: Fri Jun 20, 2014 4:38 pm

Re: Please help me ID this bakelite

Post by Curly »

yes, my headplate looks just like that ... you can just make out the shape in the photo I posted, although you can't read it

thanks kindly for the info ... I didn't know they used older plates, but I've always wondered why my smaller pickup model had a seemingly older headplate logo!
Post Reply

Return to “Rickenbacker Steels: by Richard Shatz”