Can anyone tell me what the saddle radius of this type bridge is? Do they work well with a 325V59?
Thanks---
Bob
Sorkin or Bowtie bridge.
Moderators: rickenbrother, ajish4
-
- New member
- Posts: 2
- Joined: Thu Feb 26, 2015 3:59 pm
Re: Sorkin or Bowtie bridge.
I have a Sorkin on my 325 and it works great. I was lucky that no one had cut any grooves for the strings.
Re: Sorkin or Bowtie bridge.
Google is your friend:
https://www.allparts.com/GB-0526-001-Ni ... _1547.html
Notice that the radius is flatter than a Rick crown radius, but that can be adjusted when the slots are cut and the bevels burnished.
HOWEVER - notice the string spacing. Now you know why the low E-string on JL's '58 hung off the edge of the fingerboard at the upper frets. Stock Rick bridge spacing is @ 2 inches.
https://www.allparts.com/GB-0526-001-Ni ... _1547.html
Notice that the radius is flatter than a Rick crown radius, but that can be adjusted when the slots are cut and the bevels burnished.
HOWEVER - notice the string spacing. Now you know why the low E-string on JL's '58 hung off the edge of the fingerboard at the upper frets. Stock Rick bridge spacing is @ 2 inches.