Who specializes in Lennonizing a 325c58
Moderators: rickenbrother, ajish4
Who specializes in Lennonizing a 325c58
I have a stock 325c58 that I'd like to have the Lennon mods applied to, but I don't want to do it myself. Are there any luthiers out there who specialize in this and offer these services? Thanks!
- deaconblues
- RRF Consultant
- Posts: 2390
- Joined: Tue Feb 06, 2007 5:14 pm
Re: Who specializes in Lennonizing a 325c58
It's a Bigsby install and a setup basically. Any decent guitar tech should be able to handle it. Make sure you research and find one who isn't a hack.
Re: Who specializes in Lennonizing a 325c58
My worry is that a 325 isn't something most techs will have come across, and there are some quirks to properly installing the Bigsby and the bowtie bridge. I'd rather have somebody do it who has done several 325 conversions in the past and knows the process in and out.deaconblues wrote:It's a Bigsby install and a setup basically. Any decent guitar tech should be able to handle it. Make sure you research and find one who isn't a hack.
- Medicus1963
- Member
- Posts: 392
- Joined: Thu Nov 17, 2011 7:24 am
Re: Who specializes in Lennonizing a 325c58
Hi,
like Dan said, any decent guitar tech could do this, i did it by myself about four times and never had a problem unless you have two left hands !
Peter
like Dan said, any decent guitar tech could do this, i did it by myself about four times and never had a problem unless you have two left hands !
Peter
All you need is love and a rick !