Who specializes in Lennonizing a 325c58

The short-scale model that changed history

Moderators: rickenbrother, ajish4

Post Reply
Zoso
New member
Posts: 2
Joined: Fri May 30, 2008 10:44 am

Who specializes in Lennonizing a 325c58

Post by Zoso »

I have a stock 325c58 that I'd like to have the Lennon mods applied to, but I don't want to do it myself. Are there any luthiers out there who specialize in this and offer these services? Thanks!
User avatar
deaconblues
RRF Consultant
Posts: 2390
Joined: Tue Feb 06, 2007 5:14 pm

Re: Who specializes in Lennonizing a 325c58

Post by deaconblues »

It's a Bigsby install and a setup basically. Any decent guitar tech should be able to handle it. Make sure you research and find one who isn't a hack.
Zoso
New member
Posts: 2
Joined: Fri May 30, 2008 10:44 am

Re: Who specializes in Lennonizing a 325c58

Post by Zoso »

deaconblues wrote:It's a Bigsby install and a setup basically. Any decent guitar tech should be able to handle it. Make sure you research and find one who isn't a hack.
My worry is that a 325 isn't something most techs will have come across, and there are some quirks to properly installing the Bigsby and the bowtie bridge. I'd rather have somebody do it who has done several 325 conversions in the past and knows the process in and out.
User avatar
Medicus1963
Member
Posts: 392
Joined: Thu Nov 17, 2011 7:24 am

Re: Who specializes in Lennonizing a 325c58

Post by Medicus1963 »

Hi,
like Dan said, any decent guitar tech could do this, i did it by myself about four times and never had a problem unless you have two left hands !

Peter
All you need is love and a rick !
Post Reply

Return to “Rickenbacker Vintage 325 Models: by Glen Lambert”