Toaster covers on HiGains W/ adj. pole pieces

Building pickups from the ground up

Moderator: jingle_jangle

User avatar
admin
Site Admin
Posts: 15029
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by admin »

Brett: It can be done, of course. :)
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
User avatar
ric330
Intermediate Member
Posts: 752
Joined: Fri Aug 11, 2006 3:58 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by ric330 »

Hey Brett,
I was after getting a vintage look with the more modern output on my 360. The taller pole pieces can be adjusted even closer to the strings for more strength so to speak.
I found doing the conversion to old look but HiGian wind was the ticket for me. Nothing wrong with the way that Rickenbacker had designed the HiGains, in fact they are quite nice I just wanted mine to look old.
As far as the Headstock is concerned, the side Walnut wings of the later model Ricks can be cut but would require some refinish work. Of course this would be easier on a MG or JG. the FG would require some experienced finisher to blend the color as the old finish would probably be slightly yellowed.

Another key point is the placement of the tuners on the headstock. Either of these headstocks could be trimmed if you really wanted to but notice that this 80's headstock tuner placement is closer to the center of the headstock compared to the 90's headstock:

Image

Image

Than look at the back of the headstocks of 80's vs. 90's:

Image

Image

When did they changed the placement, I don't know but most Guitar manufacturers change things as production changes.
They all look great, they are just different.
Here's 2007 with Schaller tuners which is certainly narrower:

Image

Here's a 60's headstock:

Image

Here's my 2007 360 JG with vintage tuner conversion on the narrower headstock.jpg

Image

It was quite a bit of work to make the front of the headstock conversion undetectable but well worth it to me because I love the way the vintage Rickenbacker headstcok looks.
...went in to buy a 52' Tele and walked out with a 360 Jetglo...
btomlinson
Junior Member
Posts: 105
Joined: Wed Feb 22, 2006 9:44 am

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by btomlinson »

Kevin,

It all looks really nice. I don't think I would do anything to the headstock but I do like the idea of the vintage tuners. My 660 has them and I love them.

Great work. Thanks
User avatar
whojamfan
RRF Consultant
Posts: 2552
Joined: Tue Jul 17, 2007 10:50 am
Contact:

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by whojamfan »

Thanks for the how too on the pole pieces. Provided I don't blow it, it should turn out well :D
User avatar
ric340JG
New member
Posts: 60
Joined: Sat Jan 19, 2008 12:46 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by ric340JG »

ric330 wrote:There is a post about that in the Rickenbackers Wanted section. "Allen Screws w/o mushroom heads for the newest Higains?"

If the polepieces aren't threaded you can drive them out carefully with a center punch and a grooved piece of wood. Then cut the heads off and drive them back in.
This method requires you to take out the pickup from the wiring harness so you are able to work on them.

Otherwise if the pole pieces have an Allen head mushroon type head you can just screw them out and replace with allen head studs or
use your originals doing the steps above. Cut head off, cut slot in the headless polepiece and screw them back in.
Are you saying here that this modification can be done even with the older high gain polepieces ?
User avatar
paologregorio
Senior Member
Posts: 6371
Joined: Wed Aug 08, 2007 12:56 pm
Contact:

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by paologregorio »

It's been done, but be careful! I ruined a set of hi gains doing this-the bobbin came apart when I removed the button tops. Probably best to do one button top at a time, replace it in the bobbin, and then do the next one.
User avatar
ric330
Intermediate Member
Posts: 752
Joined: Fri Aug 11, 2006 3:58 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by ric330 »

Yeah, that's safest way to do it.
...went in to buy a 52' Tele and walked out with a 360 Jetglo...
User avatar
rickendelic
Member
Posts: 278
Joined: Mon Jun 11, 2007 6:13 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by rickendelic »

Maybe, the Ric Boutique could make pins available that retro in so we can do the conversion and put them back if we like.

They sell the covers,... why not the pins? I'd buy 'em. :D
User avatar
ric330
Intermediate Member
Posts: 752
Joined: Fri Aug 11, 2006 3:58 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by ric330 »

That sounds like a great idea.
What I should do is go down to hardware store put some allen head screws in there and see if the pickup sounds any different than cut-off the original pole piece material from the pickup.
...went in to buy a 52' Tele and walked out with a 360 Jetglo...
User avatar
rickendelic
Member
Posts: 278
Joined: Mon Jun 11, 2007 6:13 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by rickendelic »

and with that, I now feel,.. that only perhaps in a small way,... I may have earned my small, humble, place here,...... unless you were joking :)
xcoyle
Intermediate Member
Posts: 689
Joined: Mon Apr 26, 2004 5:48 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by xcoyle »

Love the mod on the hi-gains.

On to a question: I have been keeping my eye open for those Grovers with a star on them for years, but have never seen a set come up on Ebay. Were they made just for Rickenbacker?
User avatar
ric330
Intermediate Member
Posts: 752
Joined: Fri Aug 11, 2006 3:58 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by ric330 »

rickendelic wrote:and with that, I now feel,.. that only perhaps in a small way,... I may have earned my small, humble, place here,...... unless you were joking :)
I was serious, actually. The reason I cut off the original pole pieces is that I was so impressed with the way that the pickups sounded in my BF Deluxe Reverb that when I did the mod I wanted to retain as much of the original parts that make up the High Gain pickup. Well after the mod they sounded so close I can't tell the difference.
I did raise the bridge and neck pickups up about 1/16+ after the mod to compensate for difference due to the crown heads being cut off. It worked well I'm happy and just wanted to pass on the results to others interested.
...went in to buy a 52' Tele and walked out with a 360 Jetglo...
User avatar
rickendelic
Member
Posts: 278
Joined: Mon Jun 11, 2007 6:13 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by rickendelic »

I think the mod is great, I even saved the link to my favorites for later, I was seriously up last night thinking about it when it dawned on me about Ric making available a retro pin. What triggered it in my mind was when you had the bit in the instructions about making a slot for screwing the part back up in. I just thought, "They could have that available, they make one with a cap,... they could make one without easily enough, right?"

you gotta let us know how it goes, if it sounds different or not with the allen head screws. :D

(p.s. i saved the link to the tuner conversion as well, many thanks)
User avatar
ric330
Intermediate Member
Posts: 752
Joined: Fri Aug 11, 2006 3:58 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by ric330 »

Will do.
I'm going to be doing another toaster top conversion next week - I'll give the off the shelf screws a shot and listen and tell you what I find - although this project will be using the originals cut off and slotted as I did before, ultimately.
...went in to buy a 52' Tele and walked out with a 360 Jetglo...
User avatar
rickendelic
Member
Posts: 278
Joined: Mon Jun 11, 2007 6:13 pm

Re: Toaster covers on HiGains W/ adj. pole pieces

Post by rickendelic »

somebody's selling modded pu's on ebay

http://cgi.ebay.com/Rickenbacker-High-G ... 7C294%3A50
Post Reply

Return to “Winding Up With The Best: by Sergio Silva”