Hi-gain covers?
Moderator: jingle_jangle
- The Mod Lang
- Junior Member
- Posts: 108
- Joined: Fri Sep 30, 2011 12:04 am
- Contact:
Hi-gain covers?
Are there any hi-gain covers to make them look like toasters? Love the hi-gain sound, but the look....eh, not so much
Re: Hi-gain covers?
Yes, there are. Try Chris Clayton at Pick of the Ricks.
Re: Hi-gain covers?
Or try Mike Parts at the Rickenbacker page (http://www.the-music-connection.com/ricpart.htm )
$25 apiece, you'll have to replace the threaded button tops (with an allen key) and replace the poles with flat-headed screws with the same thread pitch to fit the covers on. Search the forum, there are many topic threads about it.
$25 apiece, you'll have to replace the threaded button tops (with an allen key) and replace the poles with flat-headed screws with the same thread pitch to fit the covers on. Search the forum, there are many topic threads about it.
- The Mod Lang
- Junior Member
- Posts: 108
- Joined: Fri Sep 30, 2011 12:04 am
- Contact:
- The Mod Lang
- Junior Member
- Posts: 108
- Joined: Fri Sep 30, 2011 12:04 am
- Contact:
Re: Hi-gain covers?
...and btw, what exactly are the poles? Can I really just replace them with the same size screw?
Re: Hi-gain covers?
The way pickups work is that the movement of the metal strings in the magnetic field from the pickup magnets distorts the "magnetic flux" through the pickup coil, which in turn produces an electric current. The pole pieces change the shape of the magnetic field, and thus affect the change in flux caused by the movement of the strings, which changes the resulting current and, ultimately, the tone of the p/u. So replacing the adjustable pole pieces with flush-mounted screws can at least in theory affect the sound of your pickups. Having never tried this on my Hi-Gains, though, I can't say how much difference it makes in practice.
Re: Hi-gain covers?
They are the steel poles in you pickup --- yes, a screw works the same.The Mod Lang wrote:...and btw, what exactly are the poles? Can I really just replace them with the same size screw?
- The Mod Lang
- Junior Member
- Posts: 108
- Joined: Fri Sep 30, 2011 12:04 am
- Contact:
Re: Hi-gain covers?
Use stainless or brass machine screws and see what happens.collin wrote:They are the steel poles in you pickup --- yes, a screw works the same.The Mod Lang wrote:...and btw, what exactly are the poles? Can I really just replace them with the same size screw?
FYI, our parts are very low carbon, non-heat treated steel, as poor as could be for screws, but as close to iron as you can get, and perfect for pole pieces.
- 8mileshigher
- Senior Member
- Posts: 4871
- Joined: Tue May 23, 2006 12:34 pm
Hi-gain covers?
Mod Lang
Your Toasterized High Gains look real good !!
Bet they sound better too, just from the coolness factor !!!
Your Toasterized High Gains look real good !!
Bet they sound better too, just from the coolness factor !!!
Re: Hi-gain covers?
John, I'm guessing using brass or stainless screws would result in poor string response, but the odd thing is, I've found the pickups to work without any poles in them at all.
- analogpackrat
- Member
- Posts: 496
- Joined: Tue Jul 24, 2007 5:34 am
Re: Hi-gain covers?
Poles don't just shape the magnetic field and affect "string response." They form the magnetic core of the inductor that is the pickup. With no poles you've basically got an air core inductor which has much lower inductance than one with an iron/magnet core. Lower inductance = reduced bass response. I would imagine that even replacing the button top poles with low carbon steel screws will lower the inductance because you've reduced the permeability of the core by reducing the mass (assuming similar material properties between the original poles and the screws). There is a lot more going on, but it gets deep fast...
If it is to be, it is up to me.
- The Mod Lang
- Junior Member
- Posts: 108
- Joined: Fri Sep 30, 2011 12:04 am
- Contact:
Re: Hi-gain covers?
I used set screws on mine. The size was sort of hard to find, but after poking around a bit, it was a pretty easy mod.analogpackrat wrote:Poles don't just shape the magnetic field and affect "string response." They form the magnetic core of the inductor that is the pickup. With no poles you've basically got an air core inductor which has much lower inductance than one with an iron/magnet core. Lower inductance = reduced bass response. I would imagine that even replacing the button top poles with low carbon steel screws will lower the inductance because you've reduced the permeability of the core by reducing the mass (assuming similar material properties between the original poles and the screws). There is a lot more going on, but it gets deep fast...
Re: Hi-gain covers?
Does this mod affect the sound of the pickups I might consider doing this to my rics ?
- The Mod Lang
- Junior Member
- Posts: 108
- Joined: Fri Sep 30, 2011 12:04 am
- Contact:
Re: Hi-gain covers?
My mod just made the pickups sound thinner and more trebly, which wasn't necessarily a bad thing. Even so, the difference is negligible and could probably be mitigated by buying nicer screws.BILLYC58 wrote:Does this mod affect the sound of the pickups I might consider doing this to my rics ?