toaster pickup build

[(juanmotta)]

Hi my name is Juan Motta and i´m new in this forum, and i want to build a similar rick toaster pickup. I want to know if someone can help with the dimension of the bobbin ,the type and size of the magnets...
Thanks

Juan Motta

[(BAD RONBO, KiLLeR DWaRfS)]

it would be cheaper to buy one from mr. hall !!

[(juanmotta)]

I want to build it for my self, because is best for changing things....

[(rickcrazy)]

How do you mean?

[(juanmotta)]

I´m starting in making pickups, for my is a challenge to build this type of pickup so i´m going to by happy building it just for fun, so no matter to my if this pickup will sound diffenent to the original.... If is posible i want to know the bobbin dimension and the size of the magnets, that`s all.

Regards

Juan

[(rickcrazy)]

I see.

Here: bobbin length & width, 71 mm and 26 mm respectively. I use roughly 2 mm-thick plastic sheet stock for the bobbin flatwork. Bobbin is approx. 9 mm tall, or clearance between top & bottom flatwork is roughly 5 mm. Polepieces are magnetized slugs, 20 mm long and 6 mm across.

If you use #44 wire to wind your toaster pickups to about 7.5 K, chances are they will sound exactly like the real thing.

[(paologregorio)]

Sergios toaster coils are amazing!

[(rickcrazy)]

Hey! Many thanks, Paul!

[(juanmotta)]

Many thanks for the information¡¡¡ i will post some photos