Making a GOLDenBacker...need some hardware sizes
Moderators: rickenbrother, ajish4
Making a GOLDenBacker...need some hardware sizes
Hello,
I just ordered H*pSh*t tuners for my 1988 4003, JG/BT refinished to MG/BT....soon to be MG/GT --gold trim!--
yes! gold hipshot tuners....should look good with the MG ric
why do you guys put * for i and * for o in hipshot?
so, what are the hardware sizes of the screws on the bass?
3 screws for the truss rod cover
8 screws for the pickguard
2 screws for the neck pup adjust
4 screws for the bridge pup surround
2 screws for the bridge pup adjust
7 screws for the bridge-- (I have the 2 at back of the bridge to prevent tail lift, factory installed, not a user mod)
4 screws for the input jack
So, any one know the sizes of this stuff? I will look as well, any help in the right direction would be cool!
I want to put in all gold hardware, taking out the black / chrome hardware in there now....
So, lets see how it goes!
Allen
I just ordered H*pSh*t tuners for my 1988 4003, JG/BT refinished to MG/BT....soon to be MG/GT --gold trim!--
yes! gold hipshot tuners....should look good with the MG ric
why do you guys put * for i and * for o in hipshot?
so, what are the hardware sizes of the screws on the bass?
3 screws for the truss rod cover
8 screws for the pickguard
2 screws for the neck pup adjust
4 screws for the bridge pup surround
2 screws for the bridge pup adjust
7 screws for the bridge-- (I have the 2 at back of the bridge to prevent tail lift, factory installed, not a user mod)
4 screws for the input jack
So, any one know the sizes of this stuff? I will look as well, any help in the right direction would be cool!
I want to put in all gold hardware, taking out the black / chrome hardware in there now....
So, lets see how it goes!
Allen
Re: Making a GOLDenBacker...need some hardware sizes
I'll have to look, but I may have the three gold TRC screws.
Re: Making a GOLDenBacker...need some hardware sizes
jps wrote:I'll have to look, but I may have the three gold TRC screws.
cool!
let me know ...thanks!
al
Re: Making a GOLDenBacker...need some hardware sizes
I was thinking of doing one as well MG/GT If you are going to use the Gold hipshot tailpiece and you want to keep the traditional ric sound use the aluminum version instead of brass. Good luck can't wait to see it
I also think that gold trim would look awesome on a Jetglo (think les paul black beauty) the hard part is the pickup covers in gold would have to be custom. You can paint it yourself with goldflake paint in rattle can. the next problem would be trim rings in gold that would be goregous either MG or JT![Very Happy :D](./images/smilies/icon_biggrin.gif)
I also think that gold trim would look awesome on a Jetglo (think les paul black beauty) the hard part is the pickup covers in gold would have to be custom. You can paint it yourself with goldflake paint in rattle can. the next problem would be trim rings in gold that would be goregous either MG or JT
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Making a GOLDenBacker...need some hardware sizes
p/n 05202 pickguard screw tap #4 x 3/8 OV Pan head
p/n 05200 Nameplate TRC screw tap #3 X 3/8 RD pan Head
good luck
p/n 05200 Nameplate TRC screw tap #3 X 3/8 RD pan Head
good luck
Re: Making a GOLDenBacker...need some hardware sizes
Correction p/n 05209 SCREW TAP 3 x 3/8 RD PH GOLD Nameplate TRC Ric boutique $2.75 ea
p/n 05210 SCREW TAP 4 x 3/8 OV PH GOLD (Pickguard) not cheap Ric boutique $2.55 ea
sorry for the confusion![Very Happy :D](./images/smilies/icon_biggrin.gif)
p/n 05210 SCREW TAP 4 x 3/8 OV PH GOLD (Pickguard) not cheap Ric boutique $2.55 ea
sorry for the confusion
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Making a GOLDenBacker...need some hardware sizes
more info for you the tailpiece screw sizes 2 rear #6 x 3/4 OV PH front 3 #6 x 5/8 OV PH
jack plate / bridge pickup plate screws are the same #3 X 3/8 as the TRC
hope this helps
jack plate / bridge pickup plate screws are the same #3 X 3/8 as the TRC
hope this helps
Re: Making a GOLDenBacker...need some hardware sizes
John, thanks for the diagrams....
here is what I see so far......
3 screws for the truss rod cover
+++++++++++
SCREW TAP 3 x 3/8 RD PH GOLD
RD means round head----PH is phillips screwdriver
ric part number 05209
+++++++++++
8 screws for the pickguard
+++++++++++++++
SCREW TAP 4 x 3/8 OV PH GOLD
OV means oval head----PH is phillips screwdriver
ric part number 05210
+++++++++++++++
2 screws for the neck pup adjust
4 screws for the bridge pup surround
2 screws for the bridge pup adjust
7 screws for the bridge-- (I have the 2 at back of the bridge to prevent tail lift, factory installed, not a user mod)
4 screws for the input jack
++++++++++++++++++++++++++++++++++++
any other ideas on the other sizes?
any other exploded drawings, or ric diagrams?
thanks!
here is what I see so far......
3 screws for the truss rod cover
+++++++++++
SCREW TAP 3 x 3/8 RD PH GOLD
RD means round head----PH is phillips screwdriver
ric part number 05209
+++++++++++
8 screws for the pickguard
+++++++++++++++
SCREW TAP 4 x 3/8 OV PH GOLD
OV means oval head----PH is phillips screwdriver
ric part number 05210
+++++++++++++++
2 screws for the neck pup adjust
4 screws for the bridge pup surround
2 screws for the bridge pup adjust
7 screws for the bridge-- (I have the 2 at back of the bridge to prevent tail lift, factory installed, not a user mod)
4 screws for the input jack
++++++++++++++++++++++++++++++++++++
any other ideas on the other sizes?
any other exploded drawings, or ric diagrams?
thanks!
Re: Making a GOLDenBacker...need some hardware sizes
Allen, PM sent! ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: Making a GOLDenBacker...need some hardware sizes
Bass neck pickup screws are 4-40 X 5/8 round headed machine screws (mounts/adjusts the bass neck pickup)
Re: Making a GOLDenBacker...need some hardware sizes
thanks tall pat!
I am finding out about screws and stuff!
here is some helpful info on types of screw heads
--Pan head
A low disc with chamfered outer edge
--Button or dome head
Cylindrical with a rounded top
--Round head
Dome-shaped, commonly used for machine screws
--Truss head
Lower-profile dome designed to prevent tampering
--Flat head or countersunk
Conical, with flat outer face and tapering inner face allowing it to sink into the material
--Oval or raised head
Countersunk with a rounded top
---------------
rickenbacker has these listed as PAN (panhead) OV (oval head) and RD (round head)
I am finding out about screws and stuff!
here is some helpful info on types of screw heads
--Pan head
A low disc with chamfered outer edge
--Button or dome head
Cylindrical with a rounded top
--Round head
Dome-shaped, commonly used for machine screws
--Truss head
Lower-profile dome designed to prevent tampering
--Flat head or countersunk
Conical, with flat outer face and tapering inner face allowing it to sink into the material
--Oval or raised head
Countersunk with a rounded top
---------------
rickenbacker has these listed as PAN (panhead) OV (oval head) and RD (round head)
Re: Making a GOLDenBacker...need some hardware sizes
Here are some before photos
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140012.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140011.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140004.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140003.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140012.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140011.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140004.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P3140003.jpg)
Re: Making a GOLDenBacker...need some hardware sizes
tallpat1 wrote:Bass neck pickup screws are 4-40 X 5/8 round headed machine screws (mounts/adjusts the bass neck pickup)
they only have 4-40 x 1/2 on the ric site...(not that 1/8 makes a big dif, and you wotn even see it under the PG, Im just saying)
and, what is the difference between these?
SCREW M/S 4-40 x 1/2 RD SLT
ric part number---05113
and
SCREW M/S 4-40 x 1/2 RD SLT SO
ric part number--- 05149
what does that "SO" mean?
Re: Making a GOLDenBacker...need some hardware sizes
more pics of the headstock...
oh, and I will post the afters the minute I get the tuners on!
and, I am not going to do the whole bass gold trim, just some select parts and screws....just a "touch" of gold kinda thing!
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400022.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400032.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400012.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400042.jpg)
oh, and I will post the afters the minute I get the tuners on!
and, I am not going to do the whole bass gold trim, just some select parts and screws....just a "touch" of gold kinda thing!
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400022.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400032.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400012.jpg)
![Image](http://i70.photobucket.com/albums/i95/SURFBUG1/GOLD%20rickenbacker/P31400042.jpg)