Fingerboard finish developed defect
Moderators: rickenbrother, ajish4
-
- New member
- Posts: 3
- Joined: Sun Apr 24, 2016 7:54 am
Fingerboard finish developed defect
I have a Jetglo 381v69 that I purchased brand new a couple years ago, it had been in it's rickenbacker case in my house for several months while I was away, I pulled it out one day to play and noticed that the finish on the fingerboard had developed cloudy looking patches, at first they looked to me like scuffed surface owing to the fact there appears to be fine lines of cloudiness that run parallel to the frets within these patches, well around some of the edges of them etc. after taking a closer look I'm sure the problem is inside the finish, or underneath it, the cloudy appearance gives the impression that the finish has separated from the wood underneath, though I don't think this is the case. Has anyone else had this occur on their rickenbacker guitars or basses? And if so do you know how it can be fixed? The problem developed as I said, with the guitar stored in my house inside its case, It was not as a result of any playing or handling. Hope someone can help.
-
- New member
- Posts: 3
- Joined: Sun Apr 24, 2016 7:54 am
Re: Fingerboard finish developed defect
..pics of the fingerboard here (I don't know how to post pics): https://cwstoneking.tumblr.com/post/158994787700
Re: Fingerboard finish developed defect
Never seen that before. Assuming you filled out your warranty card and sent in, I'd contact RIC CS and ask how to proceed. Remember they're a small company so they might not get back to you super fast.
Re: Fingerboard finish developed defect
The warranty from RIC on the finish is 12 months from the date of manufacture, so unless they make an exception in your case, you're out of luck.
Re: Fingerboard finish developed defect
Oh right, I forgot the finish was only 1 year. Dang.
- Ontario_RIC_fan
- Advanced Member
- Posts: 2796
- Joined: Sat Dec 20, 2008 8:39 pm
Re: Fingerboard finish developed defect
For the history of the thread then...cwstoneking wrote:..pics of the fingerboard here (I don't know how to post pics): https://cwstoneking.tumblr.com/post/158994787700
Looks like it is the clearcoat. Can it not be buffed out??
Brian Morton
A Rickenbacker Fan
in Hamilton, Ontario, Canada
=========================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 MG 450
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620
78 TR7
83 TR25
A Rickenbacker Fan
in Hamilton, Ontario, Canada
=========================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 MG 450
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620
78 TR7
83 TR25
-
- New member
- Posts: 3
- Joined: Sun Apr 24, 2016 7:54 am
Re: Fingerboard finish developed defect
Thanks very much. I don't have tools or expertise for buffing the finish. I guess I'll take it to a luthier and see what they can do with it.
Re: Fingerboard finish developed defect
Make sure whoever does the finish work knows what kind of finish is on the guitar. If the prospective luthier is a Fender/nitro kind of guy, look elsewhere.cwstoneking wrote:Thanks very much. I don't have tools or expertise for buffing the finish. I guess I'll take it to a luthier and see what they can do with it.
Re: Fingerboard finish developed defect
There are two Rick web sites, each having unique strengths. Many of us visit both routinely. For a technical concern like yours, you might want to post your question over at the RIC website, where Mr. John Hall may chime in with some facts and advice. As an introduction to the site, here are the results of a search of "fretboard finish." Look through them, see what you find:
http://www.rickenbacker.com/forum/searc ... mit=Search
http://www.rickenbacker.com/forum/searc ... mit=Search