New member - First Ric

General Rickenbacker discussion

Moderators: rickenbrother, ajish4

Post Reply
User avatar
Jimbodiddley
New member
Posts: 6
Joined: Sun Aug 05, 2018 5:45 pm

New member - First Ric

Post by Jimbodiddley »

Hi all. Just wanted to introduce myself. I just bought my first Ric last week - a beautiful ruby red 330/6 from 2014. Been trying to get up to speed on all the idiosyncrasies of Rics and set-up options, etc.

Only problem I'm having is that while the action is pretty nice and low, when I capo it there's major fret buzz. From what I've read so far on this forum and elsewhere, Ric necks are supposed to be flat, so while normally this might require a truss rod adjustment to provide a little more neck relief, on Rics you're supposed to leave the neck flat and just raise the bridge? Is that true?

Seems odd to me. Don't all guitars need a little neck relief so there's room for the strings to vibrate? i.e., the neck shouldn't be perfectly flat. What's different about Rics that they wouldn't need a little relief?

Anyway, other than that, I'm really enjoying this guitar. It has hi-gains, of course, which I like. I love the sound of vintage toasters, too - Tom Petty / Mike Campbell, George Harrison, Pete Townshend - but I also love the sound Paul Weller, Johnny Marr and Peter Buck get from their hi-gain equipped 330s/360s. I tend to go for a more overdriven sound rather than a clean sound, so the hi-gains perform marvelously in that regard.

I had to raise the bridge pup a bit to balance it out a bit with the neck pup. The neck pup won't go any lower.

I put a set of D'addario 10s on it (there were 9s on it) and I may eventually go for 11s, maybe try the Ric strings, compressed or whatever. May try flatwounds at some point. Hey, experimenting and finding your own preferences is part of the fun, right?

Happy to be here in Ric-land.

Cheers
-j
330 in case-sm.jpg
Ric 330 Vox Pathfinder-1275px.jpg
-----
Rickenbacker 330/6, Ruby (2014)
Gretsch 5422TG (w/TV Jones Classics)
Squier Classic Vibe Telecaster Custom
Taylor 150E 12-string acoustic
Epiphone PR-725s acoustic (1981)
Kala Ukulele KA-TEM
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: New member - First Ric

Post by jps »

Adjust the neck relief to what works for you, just like on any other guitar. Simple as that. Enjoy that beauty. 8)
User avatar
Jimbodiddley
New member
Posts: 6
Joined: Sun Aug 05, 2018 5:45 pm

Re: New member - First Ric

Post by Jimbodiddley »

jps wrote:Adjust the neck relief to what works for you, just like on any other guitar. Simple as that. Enjoy that beauty. 8)
Thanks. I have allen keys that work with the truss rods for my Tele and Gretsch, but will I need one of these?

http://www.pickofthericks.com/gp140-1-4 ... combo-kit/
-----
Rickenbacker 330/6, Ruby (2014)
Gretsch 5422TG (w/TV Jones Classics)
Squier Classic Vibe Telecaster Custom
Taylor 150E 12-string acoustic
Epiphone PR-725s acoustic (1981)
Kala Ukulele KA-TEM
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: New member - First Ric

Post by jps »

Yeah, that, or a long handle 1/4" hex driver, the kind that uses interchangeable bits. Just don't use the bits as the driver's tube itself fits over the truss rod nuts.

Sometimes there is not enough clearance between the TR nut and the bottom of the cavity for the Xcelite driver to fit in so the walls of the hex end may need to be ground down to fit.
User avatar
jdogric12
Rick-a-holic
Posts: 10853
Joined: Thu Dec 29, 2005 6:00 am

Re: New member - First Ric

Post by jdogric12 »

A dead flat neck is great on a Rick! That's how I do it. I don't even mind a teeny little bit of buzz. Raising the bridge ought to fix that. Put a little relief in the neck if you like. Just make sure to use the right tool. Don't just grab any old thing that fits the nut. Use a long handled one like RIC specifies, for the right amount of torque. Smaller ones, or ones with a right angle, can do damage, I hear. Better safe than sorry, you know? COngrats and good luck!
User avatar
Tommy
Intermediate Member
Posts: 676
Joined: Mon Sep 29, 2008 8:49 am

Re: New member - First Ric

Post by Tommy »

Jimbodiddley wrote:Thanks. I have allen keys that work with the truss rods for my Tele and Gretsch, but will I need one of these?

http://www.pickofthericks.com/gp140-1-4 ... combo-kit/
It's worth it to buy one of those. I did. I feel safer when I adjust my truss rod using one of those screwdriver style tools.

As far as a dead straight neck with no relief...I suppose it may have to do with the way the neck is set, the angle of the headstock, the height of the bridge on a Rickenbacker. Those things may be unique to the Rickenbacker design and thus a straight neck is what works best for a Ric.

I find it a pain in the neck to raise or lower the bridge on a Ric. There are four screws and every time I mess with them to raise/lower the bridge, the darn bridge never is level. It leans like the Tower of Pisa. Four screws but to get them all in synch I fine to be a chore.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: New member - First Ric

Post by jps »

Tommy wrote:
Jimbodiddley wrote:...Four screws but to get them all in synch I fine to be a chore.
Try synchronizing this!
Ferrari 250 GTO Engine.jpg
User avatar
Jimbodiddley
New member
Posts: 6
Joined: Sun Aug 05, 2018 5:45 pm

Re: New member - First Ric

Post by Jimbodiddley »

jps wrote:
Tommy wrote:
Jimbodiddley wrote:...Four screws but to get them all in synch I fine to be a chore.
Try synchronizing this!
Ferrari 250 GTO Engine.jpg
I'll stick to guitars, thanks! :D
-----
Rickenbacker 330/6, Ruby (2014)
Gretsch 5422TG (w/TV Jones Classics)
Squier Classic Vibe Telecaster Custom
Taylor 150E 12-string acoustic
Epiphone PR-725s acoustic (1981)
Kala Ukulele KA-TEM
User avatar
Jimbodiddley
New member
Posts: 6
Joined: Sun Aug 05, 2018 5:45 pm

Re: New member - First Ric

Post by Jimbodiddley »

Thanks all!

I raised the bridge a tad, a little at a time, using quarter turns on each screw. It helped decrease most of the buzzing, and the action is still quite low, but I may at some point in the future try the give the neck a little relief.

Cheers.
-----
Rickenbacker 330/6, Ruby (2014)
Gretsch 5422TG (w/TV Jones Classics)
Squier Classic Vibe Telecaster Custom
Taylor 150E 12-string acoustic
Epiphone PR-725s acoustic (1981)
Kala Ukulele KA-TEM
User avatar
Tommy
Intermediate Member
Posts: 676
Joined: Mon Sep 29, 2008 8:49 am

Re: New member - First Ric

Post by Tommy »

jps wrote:
Tommy wrote:..Four screws but to get them all in synch I fine to be a chore.
Try synchronizing this!
Ferrari 250 GTO Engine.jpg
:D

Luckily, I have an old Mustang with a teeny, tiny carburetor. Four screws on that thing and, beleieve it or not, those four screws are easier to tweak than the four screws on a Rickenbacker bridge.
Post Reply

Return to “Rickenbacker General: by Howard Bishop”