Poor old 4000

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Lewis90
New member
Posts: 28
Joined: Wed Jan 08, 2014 5:34 am

Poor old 4000

Post by Lewis90 »

A few weeks ago I got my hands on this Cliff Burton-ized Rick 4000. It's built in July 1975 and has a wonderfull neck, but has seen better days.
With some work this could become a real nice player!

Image

The good:
- The neck doesn't seem to collapse into the body
- The bridge pickup is original and sounds amazing
- Most of the hardware is original and working fine

The bad:
- The frets on the lower register are worn down
- The neck pickup is very poorly installed
- The electronics are fried, probably been installed by someone with little knowledge of soldering
- It looks like someone tried to carve new slots in the nut with a hacksaw

For now, I'm thinking of converting this to a pre-1974 4001S, a bit like this:
Image

More pics (not for the faint of heart)
Image
Image
Image
User avatar
sloop_john_b
Rick-a-holic
Posts: 13835
Joined: Tue Jan 25, 2005 6:00 am

Re: Poor old 4000

Post by sloop_john_b »

Man. I love that as-is.
User avatar
s4001
Senior Member
Posts: 3514
Joined: Sat Jul 16, 2005 5:00 am
Contact:

Re: Poor old 4000

Post by s4001 »

There was a mudbucker in my 68 when I got it. It blended great with original pickup. Either way it's win/ win.
User avatar
cassius987
Senior Member
Posts: 4702
Joined: Mon Aug 04, 2008 2:11 pm

Re: Poor old 4000

Post by cassius987 »

sloop_john_b wrote:Man. I love that as-is.
Can't say I love it, but if the price were right, I probably would have added it to the stable anyway. Seems like it has a lot of potential. (And I love mid-70s Ric necks.)

I admit, I'm curious how the giant lego brick pickup sounds. Congrats on the cool new (to you) bass, OP!
User avatar
bassduke49
Senior Member
Posts: 6551
Joined: Wed May 14, 2003 5:00 am

Re: Poor old 4000

Post by bassduke49 »

I WAS going to ask why you thought it was a 4000 and not a 4001S, but after I saw the shot of the routing for the neck pickup, I see that you've nailed it. This is an example of the mid-'70s "set neck" 4000, somewhat crudely converted to a "4001S." The contemporary 4001S had the same chassis as the 4000. Looks like a sleeper!
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
User avatar
collin
Senior Member
Posts: 6949
Joined: Wed Mar 21, 2007 6:28 pm

Re: Poor old 4000

Post by collin »

bassduke49 wrote:I WAS going to ask why you thought it was a 4000 and not a 4001S, but after I saw the shot of the routing for the neck pickup, I see that you've nailed it. This is an example of the mid-'70s "set neck" 4000, somewhat crudely converted to a "4001S." The contemporary 4001S had the same chassis as the 4000. Looks like a sleeper!
You couldn’t tell that just by looking at the first picture, with no skunk stripe :?: :wink:
User avatar
wim
Intermediate Member
Posts: 1486
Joined: Fri Oct 31, 2003 1:37 am

Re: Poor old 4000

Post by wim »

I'm wondering, seeing that route, if the neck joint is stable? There could not be much wood left.
User avatar
bassduke49
Senior Member
Posts: 6551
Joined: Wed May 14, 2003 5:00 am

Re: Poor old 4000

Post by bassduke49 »

collin wrote:
bassduke49 wrote:I WAS going to ask why you thought it was a 4000 and not a 4001S, but after I saw the shot of the routing for the neck pickup, I see that you've nailed it. This is an example of the mid-'70s "set neck" 4000, somewhat crudely converted to a "4001S." The contemporary 4001S had the same chassis as the 4000. Looks like a sleeper!
You couldn’t tell that just by looking at the first picture, with no skunk stripe :?: :wink:
No. Because a '75 4000 and a '75 4001S would both have the set neck with the shedua (skunk stripe) neck.
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
User avatar
collin
Senior Member
Posts: 6949
Joined: Wed Mar 21, 2007 6:28 pm

Re: Poor old 4000

Post by collin »

bassduke49 wrote:
collin wrote:
bassduke49 wrote:I WAS going to ask why you thought it was a 4000 and not a 4001S, but after I saw the shot of the routing for the neck pickup, I see that you've nailed it. This is an example of the mid-'70s "set neck" 4000, somewhat crudely converted to a "4001S." The contemporary 4001S had the same chassis as the 4000. Looks like a sleeper!
You couldn’t tell that just by looking at the first picture, with no skunk stripe :?: :wink:
No. Because a '75 4000 and a '75 4001S would both have the set neck with the shedua (skunk stripe) neck.
A mid-70s 4001S had a set neck? Didn't realize that.

I always look for the stripe down by the tailpiece to check if it's a set neck or not.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Poor old 4000

Post by jps »

collin wrote:A mid-70s 4001S had a set neck?
Yes, starting around 1974-ish. Maybe, 1973.
User avatar
collin
Senior Member
Posts: 6949
Joined: Wed Mar 21, 2007 6:28 pm

Re: Poor old 4000

Post by collin »

jps wrote:
collin wrote:A mid-70s 4001S had a set neck?
Yes, starting around 1974-ish. Maybe, 1973.
Not entirely surprised. 1973 seems to be a major dividing line for all kinds of production details (large and small..), on most of the lineup.
User avatar
henry5
Advanced Member
Posts: 2695
Joined: Thu Mar 11, 2004 6:00 am

Re: Poor old 4000

Post by henry5 »

'73. My old '73 4000 was a set neck. That was the most aggressive-sounding bass I've ever played, and I've played literally thousands of basses at all price points.
daveman
Member
Posts: 242
Joined: Sun Sep 09, 2007 10:18 am

Re: Poor old 4000

Post by daveman »

Nice score. If it were mine, I'd restore it to a 4000. Plug those nasty holes.
User avatar
Kiddwad57
Intermediate Member
Posts: 728
Joined: Sun Sep 25, 2011 7:59 pm

Re: Poor old 4000

Post by Kiddwad57 »

I’m with you, daveman.
Don't let democracy end democracy.
teeder
Senior Member
Posts: 6303
Joined: Wed Apr 14, 2004 5:00 am

Re: Poor old 4000

Post by teeder »

henry5 wrote:'73. My old '73 4000 was a set neck. That was the most aggressive-sounding bass I've ever played, and I've played literally thousands of basses at all price points.
There's not much you can't do with a good sounding bridge PU in a Rick.
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”