I mounted a toaster pickup in the bridge position of my old 4003FL in 2004, along with a few other mods. I don't recall how difficult it was to remove the hi-gain pickup from the mounting plate, though.
How to install an HB1 on a 4003?
Moderators: rickenbrother, ajish4
- rickenbastard
- New member
- Posts: 78
- Joined: Tue Feb 10, 2015 6:42 pm
Re: How to install an HB1 on a 4003?
Put an actual ace of spades in the bridge position cover. Neck is overwound to imitate an EB-0.
September 1978 4001 JG (Jeff Goldblum)
May 2014 4003W (Walter Sobchak)
December 1995 4003 MG (Bass of Spades)
May 2014 4003W (Walter Sobchak)
December 1995 4003 MG (Bass of Spades)
-
- New member
- Posts: 7
- Joined: Sun Jul 23, 2017 3:06 pm
Re: How to install an HB1 on a 4003?
Does anyone have one or two HB1s for sale?
I can't find any for less than $160. I'd really like to try one in my '76 4001.
I can't find any for less than $160. I'd really like to try one in my '76 4001.
Re: How to install an HB1 on a 4003?
Just sent you an email Conrad!
-
- New member
- Posts: 7
- Joined: Sun Jul 23, 2017 3:06 pm
Re: How to install an HB1 on a 4003?
aceonbass wrote:Just sent you an email Conrad!
Hey, didn't get an email Yet, checked my junk box too. Can you send me a PM?
Re: How to install an HB1 on a 4003?
Thanx Dane! This stopped the noise which was coming out of my 4000 after having soldered an HB-1 into it.aceonbass wrote:The red wire goes to the switch, and the blue/shield wires go to the back of the pot. I seem to have an extra HB1 in stock too...
68 4001|73 4001 MG|75 4000 MG|79 4001 JG FL|81 4001S AZG|86 4003 MID/BT|86 4003 Shadow|88 4003s Blackstar|89 4003 Grey/BT FL|93 4004 Ci|96 4003S/8 FG|98 4003S/5 JG|05 650D|05 4004Cii/5 TG|08 660/12 JG|18 4003S/5 MID|19 4003S/5 WAL ||TR35B|RB 30||