Dis Functional 360/12
Moderator: jingle_jangle
Dis Functional 360/12
Don-I have a 360/12 that on occassion will not put out any sound through the bridge pick up. I've pulled the pickguards, and checked for bad connections, but everything is solid. The neck pick-up and combination of neck and bridge do work, but I inspected the pick-up selector switch and it seems to be operating properly, but can you advise on what I should be looking for? I do have a digital multimeter if it is needed. Thanks!***Mark
Its MexiCAN not MexiCANT
Mark: While we await Don's diagnosis, do you have a stereo output jack and if so, is it possible that you sometimes plug into it with a mono cord by mistake?
Life, as with music, often requires one to let go of the melody and listen to the rhythm
Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Gary: That is where I was going. Great minds think alike, or perhaps fools seldom differ.
Life, as with music, often requires one to let go of the melody and listen to the rhythm
Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
Could be either something not working right with the jack or a wire touching another wire shorting it out. I have seen a few Ric's that the Stereo jack sometimes doesn't make contact right. A good dose of DeOxit D-5 contact restorer should do the trick for that but best to take it to someone who has alot of experience with Ric's to sort it out. another thing is sometimes the contacts on the switch can get weird and just need to be cleaned with the spray stuff or a bit of #600 wet or dry sandpaper between the the two tabs.