Yet another tailpiece question..

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

Yet another tailpiece question..

Postby (Gerb) » Sat Aug 31, 2019 7:09 am

Hi all,

It's been some time since I last posted something on this forum, but still perfectly happy with my 4001C64. Except..

It has taillift. Always had a little, but now it's come to a point where I believe that the break angle behind the bridge causes the strings to go "out of phase", for a lack of better terms.

Recently, I bought a 70's tailpiece + bridge (and foam) as a replacement for said bridge, but it's a 5-screw one. So, my question is: would it hurt to only use the three screws + holes that are in the C64? I don't want to make extra holes in it, plus the 5-screw bridge didn't come with any and I don't know the exact measure of 'em.

Any suggestions on how I could fix this without replacing stuff are also welcome!

(Disclaimer: I looked all over the forum to see if there was a similar question regarding using the 5-screw tailpiece as a 3-screw, but I couldn't find any. So, if there's a thread I didn't see; please let me know. :))
User avatar
(Gerb)
New member
 
Posts: 23
Joined: Fri Nov 11, 2011 7:55 am
Location: The Netherlands

Re: Yet another tailpiece question..

Postby (Dirk) » Sat Aug 31, 2019 12:30 pm

I think you've answered your own question in a way.
If you only use 3 screws it will lift just like the original most likely.

If you're worried about resale value, would the 2 missing screw spots be visible when the original bridge is put back on?
If that's true, I don't think that would affect value, at least to me it wouldn't.

Not sure what you mean about out of phase, that's an electronic term. Do you mean intonation maybe?
And if so I can't see a lifted bridge moving that much to really affect tuning or intonation. It would have to move
a huge amount forward or back to change things.

Good luck,
Dirk
User avatar
(Dirk)
New member
 
Posts: 91
Joined: Sun Apr 29, 2012 7:06 pm

Re: Yet another tailpiece question..

Postby (ram) » Sat Aug 31, 2019 2:20 pm

What Dirk said. The old tail piece would cove the new holes I would think but if it were me buying I'd want the 5 screw as to have everything nice and flat. I have a '74 4001. It has a little lift. If it ever gets worse, the drill will come out and two more screws into the original piece. I have a 4003s5 with five screws and there is really nothing there that makes it look bad. Post a picture with the new piece on it if/when you get it on.
The only thing we can perceive are our perceptions - George Berkeley
User avatar
(ram)
Senior Member
 
Posts: 3541
Joined: Sun Jun 25, 2006 3:55 pm
Location: Bumpass, VA, USA

Re: Yet another tailpiece question..

Postby (lumgimfong) » Fri Sep 06, 2019 12:36 am

Will the Hipshot replacement drop right in without needing more holes?
(lumgimfong)
Junior Member
 
Posts: 186
Joined: Fri Jan 13, 2017 5:57 pm

Re: Yet another tailpiece question..

Postby (jps) » Fri Sep 06, 2019 2:17 am

Yes.
(Insert famous quote here)
User avatar
(jps)
RRF Consultant
 
Posts: 35940
Joined: Wed Feb 12, 2003 7:00 am
Location: Not of this Earth

Re: Yet another tailpiece question..

Postby (aceonbass) » Fri Sep 06, 2019 6:36 pm

Any three screw tailpiece will lift (except the old cast aluminum ones), and the current castings (all 3 and 5 screw versions) are the heaviest castings RIC has ever made. Honestly, I would add two screws to the rear of the tailpiece (ala early 7 screw 4003's). You don't have to use the same size screws used on the rest of the tailpiece. I use the smaller screws that come with most strap lock pegs. You can also wait for the new 4003 tailpiece/bridge assembly when it's released, hopefully next year. I would NOT put a Hipshot on the bass. They spoil the vintage vibe of the C64.
User avatar
(aceonbass)
Veteran RRF member
 
Posts: 6512
Joined: Tue Jul 09, 2002 6:00 am
Location: Parkville, Missouri


Return to Rickenbacker Basses: by Joey Vasco & Tony Cabibe

Who is online

Users browsing this forum: No registered users and 3 guests