Testing out strings is fun!

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
lumgimfong
Intermediate Member
Posts: 704
Joined: Fri Jan 13, 2017 4:57 pm

Testing out strings is fun!

Post by lumgimfong »

Been testing out round wounds to see which I like best on my 4003. Here are my impressions. Tell me yours.

So far I have tried:
Stock Ric strings - Bright and articulate, balanced lows/mids/highs. Fun factor is high, as in, it makes me want to keep grabbing it throughout the day to play it and hear the tones.
Daddario Pro Steels - Bright and articulate but mid scooped to the point of sounding "empty". Hard to put my finger on it. Like an ingredient is missing. Like a smily face EQ. Nothing wrong with that. But if you like more mids and warmth it lacks that.
Daddario Nickel wounds - Sounds just like the Prosteels to me but "duller". I guess cuz nickel is not as sparkly highs as steel.

It is interesting to note that the above strings all sound in the same ballpark - soundwise. The ones below sound in a different class - soundwise.

Rotosound SM66 - Bright and articulate with a very filled out and broad sounding mid and bass. Has its own voice compared to the above three. A very big, massive sound compared to the others so far. Even tone throughout all strings and registers. The most "powerful" sounding string compared to the others. One thing I don't like about them is the red wrap on them which sheds when removing them from the bass as the wrap passes thru the tailpiece holes. But that is a minor thing.

DR Fatbeams - As bright and articulate as the rest, but also has its own voice. "Rubbery" mids and lows. I don't know how to describe it. But it has a very dark and mysterious tone. Unexpected, but delightful sounds. More spicy and complex than the others. Like Indian food - lotsa different spices all together make for a complex flavor. The fun factor is high and it is the only one besides the Rics that made me come back throughout the day to pick it up just to have fun hearing the sound.

So, I am oddly surprised that I am finding myself liking the Fatbeams the best. But I cannot deny that they are the most fun to play.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Testing out strings is fun!

Post by jps »

Have you ever tried TI Jazz Rounds?

Here is a fresh set on my old March '73 4001 with stock pickups, played finger style.

User avatar
bassduke49
Senior Member
Posts: 6551
Joined: Wed May 14, 2003 5:00 am

Re: Testing out strings is fun!

Post by bassduke49 »

Jeff, check your email! :D
Author: "The Rickenbacker Electric Bass - 50 Years As Rock's Bottom"
User avatar
Dirk
Member
Posts: 339
Joined: Sun Apr 29, 2012 6:06 pm

Re: Testing out strings is fun!

Post by Dirk »

You might want to check out DR High Beams?
I would guess you might put them in the first group.

Thanks for the comparisons.
User avatar
lumgimfong
Intermediate Member
Posts: 704
Joined: Fri Jan 13, 2017 4:57 pm

Re: Testing out strings is fun!

Post by lumgimfong »

@jps: Wow! Incredible and tasteful playing!! Tone is huge yet articulate thru the mix. I hear everyone raving about the TI's. They are expensive but worth it if they last a long time. Can they go 6 months without losing their presence and clarity?


@Dirk: Yes, I was thinking of trying the HiBeams at some time. Will have to report back if I do.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Testing out strings is fun!

Post by jps »

lumgimfong wrote:I hear everyone raving about the TI's. They are expensive but worth it if they last a long time. Can they go 6 months without losing their presence and clarity?
A lot of that will depend on your playing style and technique, along with your body chemistry as to how it deals with nickel strings. I find them to last years, although with time they will mellow out, some.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Testing out strings is fun!

Post by jps »

Here is another recording with TI Jazz Rounds, only this time it's the FG July '73 4001; same setup, same gig. I was comparing the two different bridges (cast aluminum vs. the next gen version as found starting in late Spring of '73.

User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Testing out strings is fun!

Post by jps »

Here is the setup for the gig (Orion Studios in Baltimore) What's not seen here is the Avalon U5 used to run the post effects (tech21 VTBass, EB VJr., Voodoo Lab Tremolo) signal to the recording console. My amp and the EV RE20 was for FOH sound.
Jeff-MG 4001-800_4498.jpg


And, here are some of the audience from that show.
RRF-Friends-1200_4767.jpg
teeder
Senior Member
Posts: 6303
Joined: Wed Apr 14, 2004 5:00 am

Re: Testing out strings is fun!

Post by teeder »

jps wrote:
lumgimfong wrote:I hear everyone raving about the TI's. They are expensive but worth it if they last a long time. Can they go 6 months without losing their presence and clarity?
A lot of that will depend on your playing style and technique, along with your body chemistry as to how it deals with nickel strings. I find them to last years, although with time they will mellow out, some.
A put a fresh set of TI JR's on my '69 about a month ago and though they sound great, I actually prefer the TI Flats on this bass. Then again, I'm starting to lean toward flats for all my basses! I get plenty of bite and clarity using a pick.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Testing out strings is fun!

Post by jps »

I have JRs on one Rick and JFs on the other. Best of both worlds. :D
User avatar
Kiddwad57
Intermediate Member
Posts: 728
Joined: Sun Sep 25, 2011 7:59 pm

Re: Testing out strings is fun!

Post by Kiddwad57 »

I second the TI Jazz Rounds. The quality is there in spades. They are low tension and it took some time to get used to that. They last forever!
Don't let democracy end democracy.
Benjamin
Junior Member
Posts: 151
Joined: Mon Sep 14, 2009 9:34 pm

Re: Testing out strings is fun!

Post by Benjamin »

Try DR Lo-Riders. I liken them to a more even/professional sounding set of RS66LD Rotos.
User avatar
cjj
RRF Moderator
Posts: 10900
Joined: Tue Jul 22, 2008 6:17 pm
Contact:

Re: Testing out strings is fun!

Post by cjj »

Benjamin wrote:Try DR Lo-Riders. I liken them to a more even/professional sounding set of RS66LD Rotos.
That's a very interesting bit of info. I've been a fan of Rotosound for decades, now I'm gonna have to give DR Lo-Riders a try!
8) 8) 8)
I have NO idea what to do with those skinny stringed things... I'm just a bass player...
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Testing out strings is fun!

Post by jps »

Kiddwad57 wrote:I second the TI Jazz Rounds. The quality is there in spades. They are low tension and it took some time to get used to that. They last forever!
Having used them for a long time, now, they feel perfectly natural, to me. "Standard" gauge/tension bass strings feel like bridge cables, now, plus, they are kind of rough feeling given how smooth the JRs feel.
User avatar
henry5
Advanced Member
Posts: 2695
Joined: Thu Mar 11, 2004 6:00 am

Re: Testing out strings is fun!

Post by henry5 »

I always end up going back to Rotos. I like both the sound and feel best. Strangely, I don’t really like smooth-feeling strings and, partly because I play so lightly, I like an aggressive-sounding string.

One issue with the others is the cost. In the UK a set of Roto Swing Bass can be had for about £18.99. DRs are at least twice that and TI rounds are £55!

I actually really like these too:

https://www.pmtonline.co.uk/rotosound-r ... lsrc=aw.ds

They’re really low tension, lower than the TI flats, they sound great and they’re really cheap.
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”