Stereo volume pedal
Moderators: rickenbrother, ajish4
Stereo volume pedal
I was wondering if anyone knows of a volume pedal that takes a TRS input from a Ric and splits the signal to two mono outputs. I have a home made Rickosound which is great but I’ve just bought a Helix Stomp and I’d rather use the expression for switching snapshots than volume. If I could get a volume pedal I could dispense with my DIY Rickosound. Cheers!
Re: Stereo volume pedal
The Ernie Ball Stereo Volume/Pan pedal should do what you want.
With a TRS plugged into the "B IN STEREO", the Tip goes through the lower volume pot to the Tip of "B OUT STEREO", plug a mono cable in here.
The Ring signal goes through the "A IN MONO" switch (don't plug anything in here so the switch stays closed), then through the "VOLUME/PAN SWITCH", then through the upper volume pot to the Tip connection on "A MONO OUT". This is where the other mono cable is plugged in.
With a TRS plugged into the "B IN STEREO", the Tip goes through the lower volume pot to the Tip of "B OUT STEREO", plug a mono cable in here.
The Ring signal goes through the "A IN MONO" switch (don't plug anything in here so the switch stays closed), then through the "VOLUME/PAN SWITCH", then through the upper volume pot to the Tip connection on "A MONO OUT". This is where the other mono cable is plugged in.
I have NO idea what to do with those skinny stringed things... I'm just a bass player...
Re: Stereo volume pedal
Thanks that looks like it will do the trick!
Re: Stereo volume pedal
More like it'll do the tRICK, right? Heh heh, couldn't resist.StevieDee wrote:Thanks that looks like it will do the trick!
Re: Stereo volume pedal
Korladis wrote:More like it'll do the tRICK, right? Heh heh, couldn't resist.StevieDee wrote:Thanks that looks like it will do the trick!
-------------
Bands: 2
Bass: -64 and -67
Amp: Sunn 300T and Model T prototype
-------------
Bands: 2
Bass: -64 and -67
Amp: Sunn 300T and Model T prototype
-------------