650 and 4004

Setup, repair and restoration of Rickenbacker Instruments

Moderator: jingle_jangle

ricnvolved

Post by ricnvolved »

Your mention of those models not being available in 12-string is interesting. To be honest, I hadn't even thought about that. I'm guessing that Rickenbacker didn't think there would be much demand for the 650 & 380 in 12-string; anyone wanting a 12-string guitar would just go with a 300 series or C series model.
User avatar
sir_andrew_of_left_coast
Veteran RRF member
Posts: 729
Joined: Mon Aug 07, 2000 6:38 am

Post by sir_andrew_of_left_coast »

The bridge.

These models use a different bridge than found on older-model RICs. The saddles accomodate only one string--not pairs.
Member #03
User avatar
jwilli
RRF Consultant
Posts: 4327
Joined: Sun Aug 06, 2000 8:45 pm

Post by jwilli »

I asked JH about this a while back. He said that he could get a correct 12 saddle bridge made for these guitars. He may have even had a prototype bridge in his office at the time. A 650/12 or 380/12 would be a nice addition.
User avatar
admin
Site Admin
Posts: 15133
Joined: Wed Jul 05, 2000 5:00 am
Contact:

Post by admin »

RIC has explored the possibility of a 380/12. If I remember correctly from a post made by John Hall quite some time ago now, there are problems with the piezo/bridge arrangement and a 12 string set-up on the 380, as Andrew has indicated. Apparently the current technology used by RIC does not technically permit a 12 string arrangement. I suspect we will hear more about this in the future.
Life, as with music, often requires one to let go of the melody and listen to the rhythm

Please join the Official RickResource Forum Facebook Page https://www.facebook.com/groups/379271585440277
nyanmage

Post by nyanmage »

Thanks Jeffery!
Thanks Andrew!

I also agree with your opinions. But I also bear a few questions.

>"Rickenbacker didn't think there would be much demand for the 650 & 380 in 12-string"

I think that it is one reason why it is main. But I feel a mystery. For instance, RIC has released a new model "4004CII-5st" recently. Did Rick feel more demand for 4004CII-5st than 650-12st & 380-12st? I can't think so.

>"The bridge"

Yes. I think so. But it is just meaning that the question changes to "Why doesn't RIC develop a combi-bridge for 12st?" or "Why doesn't RIC use a established bridge and tailpiece for 12st"

Nyanmage
nyanmage

Post by nyanmage »

Thanks John!
Thanks Peter!

Your opinions give more practical suggestion to us. We will be able to extend guesses.
User avatar
jwilli
RRF Consultant
Posts: 4327
Joined: Sun Aug 06, 2000 8:45 pm

Post by jwilli »

Peter, exactly. The piezo is the problem with the 12 string bridge. I'm sure that it will be worked out in the future. As for a 650/12? Bring it on! I'd love to hear what RIC humbuckers sound like on a 12 string...........
dougp
Veteran RRF member
Posts: 214
Joined: Thu Mar 14, 2002 3:56 pm

Post by dougp »

Nyanmage wrote:
>"Rickenbacker didn't think there would be much demand for the 650 & 380 in 12-string"

"I think that it is one reason why it is main. But I feel a mystery. For instance, RIC has released a new model "4004CII-5st" recently. Did Rick feel more demand for 4004CII-5st than 650-12st & 380-12st? I can't think so."

Actually, I would expect a much higher demand for a 4004CII/5 than a 650/12 or 380/12. Five-string (or more!) basses are quite common these days, but I've probably seen at most 2 or 3 bands (out of hundreds) in the last five years who used a 12-string electric guitar. In the same time frame, I've seen dozens of 5-string basses onstage, and the types of bands I mostly see (older-skool punk or psych) tend to be far less likely to use 5-string basses than, say modern jazz/prog/fusion or nu-metal bassists (in those genres, you probably don't see 4-string basses much at all).
My basses are Rickenbackers. My synthesizers and recording gear are analog.
nyanmage

Post by nyanmage »

Thanks Doug!

I can understand your opinion. Certainly, 5strings(or more) basses are general in the scene of the present music. But maybe it does NOT mean demand for RIC's 5strings(or more) basses at most occasions. It is regrettable.
And...
Certainly, 12-strings(or more!) guitars are not general in the scene of the present music. But if most guitar players long for a 12strings guitar, maybe it mean demand for RIC's 12strings guitars at most occasions.
This is a meaning I wrote.

Nyanmage
dougp
Veteran RRF member
Posts: 214
Joined: Thu Mar 14, 2002 3:56 pm

Post by dougp »

Hi Nyanmage - yeah, I completely understand your point that even though 5-string basses are more common than 12-string guitars *in general*, Rickenbacker is much more strongly associated with 12-string guitars than with 5-string basses (I doubt that any company is more strongly associated with 12-string guitars!).

I would suspect (hope) that by coming out with a 5-string bass with a wider fretboard than the 4001/4003 (which is too narrow for most peoples' hands), Rickenbacker is intending to benefit from the (increasingly large) market for 5-string basses, and that the "newer" designs (4004 & 650) will give the company recognition for making what are perceived as "current"-style (rather than "vintage"-style, which, for better or worse, is what 325's, 360's, and 4001/4003's are considered to be by most musicians/music fans) instruments ... a company cannot survive by nostalgia alone (although Gibson does a pretty good job of it with their $3k Les Pauls).

Doug
My basses are Rickenbackers. My synthesizers and recording gear are analog.
User avatar
dannyboy
Veteran RRF member
Posts: 270
Joined: Mon Oct 08, 2001 8:30 am

Post by dannyboy »

Well Doug, you have put in simple words what I've been trying to say earlier in my bad english!! Dan Image
DannyBoy :)
Nowhere man please listen, you don't know what you're missing...
Post Reply

Return to “"Vibrola" Rickenbacker Technical Forum: By Paul Wilczynski”