Hello!
I just checked out a "360/12 C63" for sale and it became clear that the owner did know for sure if it was a C63 or a v64 (I didn't either, obviously).
We looked at both on the web and could not visually tell the difference.
Can you fine folks tell me what the difference between the two are? Hopefully it's something visual.....
His had a serial # of 06 and then xxxx (I forget the next 4 digits).
thanks much - - - Richard
how do you tell a 360/12 C63 from a 360/12 v64?
Moderators: rickenbrother, ajish4
- Sir Ricardo
- Intermediate Member
- Posts: 679
- Joined: Tue Mar 17, 2009 2:58 pm
Re: how do you tell a 360/12 C63 from a 360/12 v64?
By '06, it was certainly a C63. You could also unscrew the pickguard and see if the wood braces are in the body. If they are there, you've got a C63. Back to the serial number......you've got a C63.
Re: how do you tell a 360/12 C63 from a 360/12 v64?
Here's a discussion with internal links to several other discussions on the topic--should be able to assemble a pretty good picture of the differences. In general, there are differences in construction, radius, headstock, and electronics. But, IMO none significant enough to rule either one out if you're in the hunt.
c63, v64 Discussions
Bill
c63, v64 Discussions
Bill
"Let me take you down...'cause I'm going to...."
- deaconblues
- RRF Consultant
- Posts: 2390
- Joined: Tue Feb 06, 2007 5:14 pm
Re: how do you tell a 360/12 C63 from a 360/12 v64?
A good rule of thumb: look at the burst around the tailpiece.
c63
v64
c63
v64
Re: how do you tell a 360/12 C63 from a 360/12 v64?
Treble horn on the V64 is pointier. This always seems obvious to me.
Re: how do you tell a 360/12 C63 from a 360/12 v64?
The finish on that v64 is gorgeous Dan...
Bill
Bill
"Let me take you down...'cause I'm going to...."