Was '91 a bad year for cast metal?

Modern years of Rickenbacker Guitars from 1984 to the present

Moderators: rickenbrother, ajish4

User avatar
jdogric12
Rick-a-holic
Posts: 10884
Joined: Thu Dec 29, 2005 6:00 am

Re: Was '91 a bad year for cast metal?

Post by jdogric12 »

BILLYC58 wrote:I have a R tailpiece on my 12 string 2006 should I replace it with a tranpeze before it brakes/if it brakes ?
I wonder why they would brake overtime ?
Billy
You ought to be ok. It's mainly the 80's black ones. Avoid super heavy or stiff strings, as an extra precaution (and good common sense anyways!) and I wouldn't worry.
User avatar
ken_j
RRF Consultant
Posts: 4216
Joined: Fri Jul 18, 2003 5:31 am
Contact:

Re: Was '91 a bad year for cast metal?

Post by ken_j »

I believe tightening the strings evenly helps prevent tailpiece breakage when performing a string change. If you tighten all from one side or even one string close to pitch it will not permit the "R" to stay seated properly. My former 610 with black hardware never had an issue even though I had re- powder coated it. Keep in mind that it was heated a second time to 500 degrees F.
"The best things in life aren't things."
User avatar
BAD RONBO, KiLLeR DWaRfS
Professional Player
Posts: 1857
Joined: Mon Dec 17, 2007 11:58 pm

Re: Was '91 a bad year for cast metal?

Post by BAD RONBO, KiLLeR DWaRfS »

whojamfan wrote:I know 91 was a bad year for hair metal :lol: :lol:

wachu talkin' bout, willis ??? :wink:
User avatar
IHeartRics
Member
Posts: 482
Joined: Sat Apr 12, 2008 12:17 am
Contact:

Re: Was '91 a bad year for cast metal?

Post by IHeartRics »

Here's some pics of the broken bracket:
DSCN0288-1.jpg
DSCN0289-1.jpg
Expect nothing and you'll never be disappointed (and I mean that in an optimistic way).
http://www.reverbnation.com/thelowlies
http://www.myspace.com/thelowlies
User avatar
doctorwho
Veteran RRF member
Posts: 12558
Joined: Tue Jun 11, 2002 3:28 pm

Re: Was '91 a bad year for cast metal?

Post by doctorwho »

IHeartRics wrote:Here's some pics of the broken bracket: ...
Similar to the one that broke on my MG McGuinn:
brokenbracket.jpg
brokenbracket.jpg (10.23 KiB) Viewed 935 times
Mine was a clean break all the way across because it happened while the guitar was in the case ...
It is better, of course, to know useless things than to know nothing. - Seneca
User avatar
antipodean
Senior Member
Posts: 3182
Joined: Wed Jan 09, 2008 1:27 am

Re: Was '91 a bad year for cast metal?

Post by antipodean »

Check the tail-lift on this '91 4003 MID BT on ebay. Fits the suggested '91 pattern....
"I don't want to sound incredulous but I can't believe it" Rex Mossop
Folkie
Advanced Member
Posts: 1605
Joined: Sat Jan 02, 2010 1:23 pm

Re: Was '91 a bad year for cast metal?

Post by Folkie »

I own a 1991 330/12 with black hardware and a black "R" tailpiece. Should I be worried after reading this thread? Is there any way to safeguard against problems with the tailpiece other than using thinner strings? Mine is strung with a D'Addario EXL 150 set (.010, .010, .013, .013, .017, .008, .026, .012, .036, .018, .046, .026). I should admit that I'm fond of the "R" tailpiece and would rather not replace it with a trapeze.

Robert
User avatar
whojamfan
RRF Consultant
Posts: 2552
Joined: Tue Jul 17, 2007 10:50 am
Contact:

Re: Was '91 a bad year for cast metal?

Post by whojamfan »

BAD RONBO, KiLLeR DWaRfS wrote:
whojamfan wrote:I know 91 was a bad year for hair metal :lol: :lol:

wachu talkin' bout, willis ??? :wink:
Warrant-need I say more?

Also, that's when grunge broke and pretty much overtook the airwaves and record sales. Bye bye, Cherry Pie :lol:
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: Was '91 a bad year for cast metal?

Post by jingle_jangle »

Yeah, but SURF MUSIC NEVER DIED.
User avatar
whojamfan
RRF Consultant
Posts: 2552
Joined: Tue Jul 17, 2007 10:50 am
Contact:

Re: Was '91 a bad year for cast metal?

Post by whojamfan »

jingle_jangle wrote:Yeah, but SURF MUSIC NEVER DIED.
Naw, it's just been caught in an undertow :lol:

Long live the Trashwomen!
Post Reply

Return to “Rickenbacker Guitars: Modern Years - After 1983”