Hello!
Awhile ago I acquired one of my dream guitars, a vintage Rickenbacker 481. The guitar is in relatively good shape, and plays and sounds great.
There are however two screws missing. The first is one of the four scews mounting the bridge to the body. There is a screw there now that barely works, but I'd like it to be as close to original as possible.
The second is one of the headless screws (would you guys these screws?) mounting the pickup.
I've uploaded pictures so you can see them here:
http://www.flickr.com/photos/shanerideo ... 183425075/
I'm wondering if anyone knows where I can purchase these screws? Let me know!
Thank you.
Locating vintage Rickenbacker screws
Moderators: rickenbrother, ajish4
Re: Locating vintage Rickenbacker screws
These are the height adjustment screws. They come with springs if you want to replace the rubber o-rings.
http://www.pickofthericks.com/products/ ... 06114.html
I rebuilt the bridge on my 480 using the springs and replaced the intonation screws.
http://dl.dropbox.com/u/1244235/Hosted% ... bridge.png
http://www.pickofthericks.com/products/ ... 06114.html
I rebuilt the bridge on my 480 using the springs and replaced the intonation screws.
http://dl.dropbox.com/u/1244235/Hosted% ... bridge.png
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Re: Locating vintage Rickenbacker screws
The pickup mounting screws you refer to hold the covers to the bases. They are called Allen head set screws. I think the ones you need are 4-40 X 1/4" long.
They're only a dime or so apiece.
They're only a dime or so apiece.
Re: Locating vintage Rickenbacker screws
Thanks you for the bridge screws.
Are you sure those are what the pickup mounting screws are called? When I google that I just get the bridge screws that look have an allen key head. The pickup ones do not have a slotted head. Here's the pic:
Are you sure those are what the pickup mounting screws are called? When I google that I just get the bridge screws that look have an allen key head. The pickup ones do not have a slotted head. Here's the pic:
Re: Locating vintage Rickenbacker screws
Let me know if you find out where to get those "headless" rivet-looking PU height adjustment fasteners. The 481 seems to be the only Rick model that has these.
I also have a 481 that is missing one.
I also have a 481 that is missing one.
- jingle_jangle
- RRF Moderator
- Posts: 22679
- Joined: Wed Dec 22, 2004 6:00 am
- Contact:
Re: Locating vintage Rickenbacker screws
Thanks for the photo. Now I know which screws you mean! I've been turning down stainless machine screws on a lathe to remove the slots...