Which pre-amp/DI stomp box do you use with your Ric bass?

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
Isaac
Member
Posts: 439
Joined: Mon Dec 08, 2014 2:24 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by Isaac »

I use a Digitech BP355. Not exactly cutting edge, I know, but it works for me. It can also do a lot more than I'm using it for. Maybe someday I'll start using more of its features. Or maybe it'll die and I'll move on to something made this decade.
User avatar
Dom
Member
Posts: 347
Joined: Thu Jul 02, 2009 11:22 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by Dom »

TC Helicon Voicelive 3, it combines vocals, guitar, aux input and effects. I run neck & bridge clean ROS outs to the aux input via small mixer and another split from the bridge through wah, OD & vol pedal into the guitar input. Clean bass signal Vox go out to PA. Guitar path has modeling and can either go to the PA with everyone else or a separate amp. With an amp I can run a Rolls DI after the attenuator instead of the speaker. Hand the house your outputs and you control the entire mix plus your own in ear monitors.
User avatar
Ashgray
Intermediate Member
Posts: 545
Joined: Fri Mar 15, 2013 6:14 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by Ashgray »

20220303_124527.jpg
Attachments
20220303_104330_1.jpg
20220303_104330.jpg
Last edited by Ashgray on Sat Dec 24, 2022 11:27 am, edited 5 times in total.
1976 4001 "Shadow" Fretless
1978 4002 Walnut
1986 4008 Silver
1999 4001 V63 White
2012 4004 Jetglo

_____________________

Button 6 String Fretfull
Button 6 String Fretless
NS CR5 Omni Bass Fretless
Ashbory Bass
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by jps »

SansAmp GT2>MOJOMOJO>MXR Phase 90>Strymon Flint>Radial ProD2>... Sometimes a Cave Passive Pedals B-Drive Mk II is added somewhere into the chain.
User avatar
henry5
Advanced Member
Posts: 2695
Joined: Thu Mar 11, 2004 6:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by henry5 »

Tech 21 VT Bass DI. Much prefer it to both the BDDI and the Tonehammer.
User avatar
lumgimfong
Intermediate Member
Posts: 704
Joined: Fri Jan 13, 2017 4:57 pm

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by lumgimfong »

How is it different than the BDDI?
I did not like the BDDI
User avatar
henry5
Advanced Member
Posts: 2695
Joined: Thu Mar 11, 2004 6:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by henry5 »

Google it. It has completely different controls. It also sounds different. More like a vintage valve amp, but I imagine it depends what you’re putting through it to some extent. I favour something somewhere between Machinehead-ea Roger Glover and Chris Squire and am using vintage Rics (2 x ‘72 4001 basses).

I think you’ve really got to know what you’re doing with the BDDI to get the best out of it, but even then I found the mids difficult to dial in (you have to turn the other controls down to bring the mids up IIRC) and I found the drive too fizzy with my basses. I used one for a few years but as soon as I tried the VT it was 100 times easier to get what I wanted. There are so many pedals out there though, you just need to try as many as you can until you find something you like. You may like something completely different than me (in fact reading many of your posts I suspect you do). FWIW I’ve never liked the Tonehammer, the VT is night and day better for what I want.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by jps »

These were recorded through a VT Bass.


April '98 4001V63


March '73 4001

Both with TI Jazz Rounds

Some RRF members were in the audience for this show. 8)
User avatar
iiipopes
Intermediate Member
Posts: 1428
Joined: Tue May 22, 2007 5:02 pm

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by iiipopes »

I use a simple Behringer passive $25 DI: clean, transparent, and allows my sound man to adjust the mix as necessary.
Behringer DI.jpg
User avatar
henry5
Advanced Member
Posts: 2695
Joined: Thu Mar 11, 2004 6:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by henry5 »

A few people I know swear by the discontinued Tech 21 Leeds pedal; they do a newer version with extra features called the English Muffy.
User avatar
chrisdski
Intermediate Member
Posts: 667
Joined: Mon Mar 05, 2007 4:15 pm

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by chrisdski »

I’ve been using this for years with my electric bass, upright bass, or guitar.

https://www.fishman.com/portfolio/plati ... og-preamp/
Attachments
965C542D-25C0-4775-BA76-20087AF563D8.jpeg
Benjamin
Junior Member
Posts: 151
Joined: Mon Sep 14, 2009 9:34 pm

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by Benjamin »

I still have my MXR M-80 as a backup, but I have taken an adventure.

Tried a Darkglass Microtubes Infinity for a month or so and selling it now. Too much DG flavour. Some great sounds, but I found it hard to get the right balance of natural bass tone mixed with its clean and distorted channels. My basses became less like my basses and there was no getting around it. No FX loop, so other pedals such as chorus/delay/reverb must be before the preamp/distortions, which makes them muddy and bleh.

Now trialling a Two Notes ReVolt Bass. This is more like it. Natural character of the bass is retained. The dirt and drive channels sound great, especially the dirt channel. FX loop is a big bonus. The only thing I am not quite happy with is the cab sim, which is modelled on an Ampeg 8x10. It is good, but a touch woofy/damp for my liking. I have no experience with Ampeg gear and my sound preferences lean toward more hi-fi tones. Have not yet run this pedal at any gigs, so it may not be an issue. So far I am liking its ability to translate the character of the bass and response to playing dynamics.

With reference to Rickenbacker basses, the ReVolt sounds great and full with my 4003 on the clean channel. Plenty of clank if needed, warm and soft if played that way. The dirt channel can go from grunty to almost Lemmy, it is based on a Marshall head and sounds like a dirt channel should IMHO. The drive channel has a modern flavour somewhere between a muff and something like a DG pedal.
User avatar
Isaac
Member
Posts: 439
Joined: Mon Dec 08, 2014 2:24 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by Isaac »

What does "woofy/damp" mean?
teeder
Senior Member
Posts: 6303
Joined: Wed Apr 14, 2004 5:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by teeder »

Isaac wrote: Thu Feb 23, 2023 3:27 pm What does "woofy/damp" mean?
Your dog just came in out of the rain, would be my guess.
User avatar
jps
RRF Consultant
Posts: 37132
Joined: Wed Feb 12, 2003 6:00 am

Re: Which pre-amp/DI stomp box do you use with your Ric bass?

Post by jps »

teeder wrote: Fri Feb 24, 2023 9:17 am
Isaac wrote: Thu Feb 23, 2023 3:27 pm What does "woofy/damp" mean?
Your dog just came in out of the rain, would be my guess.
That was my first thought, as well. :D :mrgreen:
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”