Page 2 of 4
Posted: Tue Mar 21, 2006 12:41 am
by anoukane
Posted: Tue Mar 21, 2006 8:27 am
by ricosound
The problem could be the depth of the control cavity..or lack of. I had a hard time finding a shallow switch to use for this mod a while back when we discussed it.
Posted: Tue Mar 21, 2006 8:29 am
by anoukane
Where did you find yours? (if i may ask)
Posted: Tue Mar 21, 2006 11:04 am
by squirefan01
I ordered the pot and caps from Ric last night. They said maybe 3 weeks for delivery, but hopefully sooner. How are they usually with parts order delivery?
I was looking at this schematic from the Ric site, that I assume is valid for all Rics through 2005 (they do not have a schematic posted with the VTC option yet):
http://www.rickenbacker.com/pdfs/19507.pdf
So we see the RC circuit for the treble tone control. By adding the 2nd cap to this circuit, we'll have the .047FD (C2 in the schematic) and .0047MFD caps in series, right? That's the mod that you guys would make without the new pot? Then we add the pot to bypass this new cap or not?
Can't wait to try it out!
Posted: Tue Mar 21, 2006 11:32 am
by kcole4001
Mine came a few days late, but it was over the Christmas holidays, so yours should be on time or earlier.
Everything was bagged neatly & packed well.
Posted: Tue Mar 21, 2006 11:37 am
by ken_j
At one time John Hall stated that the pot/switch that RIC was using was not an off the shelf item. It was designed to have better durability. Remember you can order from any dealer worldwide now.
You would wire the cap as the signal path between the selector switch and the volume pot of the treble pickup (series circuit). The switch should short the cap leads.
Posted: Tue Mar 21, 2006 11:55 am
by squirefan01
Ken, are you talking about adding back in the C3 cap in that Ric schematic? That's the one that they had originally in the 4003, then as it says in the schematic they shunted that cap in later models?
Posted: Tue Mar 21, 2006 12:25 pm
by ken_j
Yes C3. The switch only needs to be a SPST on/off switch. When off (open) the signal would go through the cap passing only high frequencies. When on (closed) it would short out the cap letting all frequencies pass.
This is opposite of the way a tone circuit works. In a tone circuit the cap goes to ground, thus passing the high frequencies to ground.
Posted: Fri Mar 31, 2006 7:29 am
by squirefan01
I ordered (and just received in the mail) the pot that Ric is selling now on their site (part number 07345). It looks exactly like this...
http://www.fake58.co.uk/images/EP_0286-000%20push%20pull.jpg
...except the part where the knob gets pushed on is totally round and smooth. It seems pretty deep, but I called Ric's customer service to ask about it, and the guy thought it would be the same as what they're putting in the new 4003 (though he didn't realize that they were selling them to the public).
Is there anybody with a new 4003 that could verify that the knob itself has no "flat spot", and that if you take the knob off, what the knob connects to on the pot is round and smooth like this one that I got?
I am at work right now, so I can't take the knob off of mine to see of it has a flat spot where it fits to the pot.
Thanks!
Posted: Fri Mar 31, 2006 2:10 pm
by sabbath_of_bass
So you guys are talking about the thing they are putting on the new rics?
How hard is it to add on there? Sounds pretty kool.
This maybe a little off topic.... But is this the same mod that you guys were putting on the 4004s? I cant remember what that was. I was just wondering.
Posted: Tue Apr 04, 2006 8:35 pm
by charlyg
I got mine from Ric today. But then, I'm only 75 miles up the road! and yes it is the thing they are putting on new Ricks.
Posted: Tue Apr 04, 2006 8:39 pm
by charlyg
I sure would like to see a picture of the thing wired up.
Posted: Wed Apr 05, 2006 3:05 pm
by johnallg
Posted: Thu Apr 06, 2006 7:53 am
by ilan
Great first post... thanks John, and welcome.
Posted: Thu Apr 06, 2006 9:01 am
by atomic_punk
I think I've seen John on the offical company RIC forum. Welcome, John!!
