Rickresource Rickenbacker Forum

rickenbrother wrote:Welcome to the forum, Koy.

jaymi wrote:We already know it's better!!

Jaymi means "we" as in some people think it's better. Not everyone thinks it's better.

Yes, I've heard both good and bad opinions, but I'm always interested in hearing more people's impressions of the Hipshot, especially if they can do direct comparison between it and the Original RIC version.

thx1955 wrote:I'm just about to add a Black brass Hipshot to my 4003-S, looking forward to trying an hearing it !

Cool! Just a quick reference. There are ZERO instructions included. Might as well get you a cheapie tap & die set ready to go. You will need it to setup a good permanent ground. Hipshot says to just pinch it in between the bridge and the body of the guitar!...Wow! Takes about 10 minutes to tap a small hole, and is what I suggest for a good clean permanent install for the ground.

Koy Carson
West Texas

**Carvin AC175 Thinline Acoustic
**Ibanez EW20ZW Electric/Acoustic
**Arbor AJ145CR Jazz
**Fender FSR Silver Sparkle Jazz Bass
**Fender Geddy Lee Signature Bass
**Rickenbacker 4003 Jet-Glo Bass
**Warwick Corvette 4 string Hybrid
**Tradition Fretless Bass
**Takamine Hollow body Bass

Texas Bass Players Club #66
Fender Jazz Bass Club #328

http://www.myspace.com/k5koy

I dunno. I didn't go to the expense and trouble to tap the bridge. Just fanned out the wire and trapped it under the bridge. My bass is dead quiet with no ground issues.

aceonbass wrote:Off hand, a 4003 is the only bass I know of that has a mute with a ground wire soldered to it. Everything else, including RIC's 4004's have the wire pinched between the body and the bridge.

yep, the only soldered ground wires are on the factory 4001/4003 bridge....The 4004 basses have a hipshot or schaller bridge that rests on top of the body ....

I would not bother tapping the bridge, it is the easiest and most efficient way just to fan the wire and lay it between the bridge and the body..

Hey! I recognize that bass! You have been assimilated! Welcome to the RRF!

Welcome Koy,

Great bass, cool mods, and nice collection. I'm sure the 4003 will more than hold its own against some of your aother great basses.

Welcome Koy. I also lived in West Texas while attending ...

antipodean wrote:Welcome Koy,

Great bass, cool mods, and nice collection. I'm sure the 4003 will more than hold its own against some of your aother great basses.

Thanks! I have had it about a week now, and its certainly making an impact! I can see where it will get a "top" ranking from me.
Going to be tough for it to surpass my "Hybrid" Warwick though! Played with the Ric O Sound some yesterday, and that was interesting. I can see where that will certainly have some useful applications!

Koy Carson
West Texas

**Carvin AC175 Thinline Acoustic
**Ibanez EW20ZW Electric/Acoustic
**Arbor AJ145CR Jazz
**Fender FSR Silver Sparkle Bass
**Fender Geddy Lee Signature Bass
**Rickenbacker 4003 Jetglo Bass
**Warwick Corvette 4 Standard Hybrid
**Tradition Fretless Bass
**Takamine Hollow body Bass

Texas Bassist Club #66
Fender Jazz Bass Club #328

"You're Gonna Miss Me" By Carson-Blevins Blues Project
http://soundclick.com/share?songid=7216182

http://www.myspace.com/k5koy

Dig the Blues? Check out the Blues Republic!
http://www.bluesrepublic.org