Would this be good for Truss Rod adjustment?

[johnnysain]

Understood!

[johnallg]

I just realized where you are, Johnny. Actually, any 1/4" thinwall socketed nut driver with a handle about 8" long would work. You need one that long to keep the plastic handle away from the headstock so it won't mark it up.

[johnnysain]

Thanks for the tip johnallg

[beatlefreak]

This one works great.....

http://www.amazon.com/Extra-Long-Hollow ... 121&sr=8-1

This is the same tool that RIC sells, Xcelite by Cooper Tools. http://www.cooperhandtools.com/brands/c ... 7103483720

And here's a link to get them:
http://www.testequipmentdepot.com/xceli ... rivers.htm

[johnallg]

This one works great.....

http://www.amazon.com/Extra-Long-Hollow ... 121&sr=8-1

This is the same tool that RIC sells, Xcelite by Cooper Tools. http://www.cooperhandtools.com/brands/c ... 7103483720

And here's a link to get them:
http://www.testequipmentdepot.com/xceli ... rivers.htm

Hey Chris. I believe that's where the one from Amazon comes from too. But Johnny is in China, so he might have trouble getting them to sell and ship.