Page 2 of 3

Re: Worth the wait?

Posted: Thu May 11, 2023 11:18 pm
by WillyWonka
Changed the strings and a little tweak on both truss rods last night.

Intonation tonight.. not sure what this bridge is called, but it was my first experience with one… some quirks but I have dealt with much worse.

The “R” tailpiece doesn’t allow the wrench in to intonate the unwound strings, but tilting the bridge forward solved that.

I cleaned up the saddle grooves and nut slots a bit, and the nut was already quite close.

Sticker is still in place…

Re: Worth the wait?

Posted: Sat May 13, 2023 2:24 am
by WillyWonka
Wednesday for the mapleglo..

Re: Worth the wait?

Posted: Thu May 18, 2023 11:44 am
by WillyWonka
Mapleglo came in tuesday but I couldn't pick it up due to the Cure concert...

I picked it up last night and changed the schaller ****** strap buttons... I hate hose damn things....

I do need a couple more sets of the old style strap buttons if anyone has a few spares without $35 shipping...

I had a couple of straps I didn't like on other guitars but they work perfectly on my new 620's.

no pics yet cuz I was too busy playing her.... she was a half step flat out of the box so I'm thinking of complaining to ric customer service....

Re: Worth the wait?

Posted: Fri May 19, 2023 8:56 pm
by WillyWonka
Triplets

Re: Worth the wait?

Posted: Fri May 19, 2023 10:07 pm
by ChuckEds
My #1 for the last 21 years has been my midnight blue '02 620, and it's been a great all around player. I hope you enjoy yours for as long!

Re: Worth the wait?

Posted: Fri May 19, 2023 11:35 pm
by WillyWonka
ChuckEds wrote: Fri May 19, 2023 10:07 pm My #1 for the last 21 years has been my midnight blue '02 620, and it's been a great all around player. I hope you enjoy yours for as long!
I’m barely a year into owning a ric 6 string (650d) and they are quickly climbing up the ladder of my favorite treble geetars..

I do like the pickups in the 620’s more than the 650, but I have always preferred single coils. (P-90’s are my absolute favorites)

I’m thinking maybe I should try scatter wounds in one of the 620’s

Re: Worth the wait?

Posted: Sat May 20, 2023 3:02 am
by WillyWonka
I found a video comparing the hi gains and the toasters…

Not worth $320 + $35 shipping… it may be the excuse I need to get a 660 though….

Re: Worth the wait?

Posted: Sat May 20, 2023 9:18 am
by Uffingdon
What’s the story with the top horn on the 650?

Re: Worth the wait?

Posted: Sat May 20, 2023 10:16 am
by jps
Uffingdon wrote: Sat May 20, 2023 9:18 am What’s the story with the top horn on the 650?
IIRC, that's a Paul Wilczynski "Special". :roll: Bottom horn, too. :roll:

Re: Worth the wait?

Posted: Sun May 21, 2023 1:22 am
by Uffingdon
Thanks for the clarification.

Re: Worth the wait?

Posted: Tue May 23, 2023 10:20 am
by WillyWonka
Uffingdon wrote: Sat May 20, 2023 9:18 am I'm looking at the accent vibratos for maybe one or both of the 620's....
jps wrote: Sat May 20, 2023 10:16 am
Uffingdon wrote: Sat May 20, 2023 9:18 am What’s the story with the top horn on the 650?
IIRC, that's a Paul Wilczynski "Special". :roll: Bottom horn, too. :roll:
Uffingdon wrote: Sun May 21, 2023 1:22 am Thanks for the clarification.
yep, Paul's tulip conversion, I'm a huge fan of dubble cutaway's, and a huge fan of this geetar.



I'm looking at the accent vibratos for maybe one or both of the 620's.... they seem similar in design to the Gibson Vibrolas which I don't particularly care for, but it looks nice.

I may just order one to see if I like it.

Re: Worth the wait?

Posted: Tue May 23, 2023 5:28 pm
by ChuckEds
I've got an Accent on my '96 350V63 and it works just fine, and I use it quite a bit. IMHO they are underappreciated, I mean you're going going to do dive bombs with it but it'll give you a nice little shimmer.

Re: Worth the wait?

Posted: Wed May 24, 2023 1:24 pm
by WillyWonka
ChuckEds wrote: Tue May 23, 2023 5:28 pm I've got an Accent on my '96 350V63 and it works just fine, and I use it quite a bit. IMHO they are underappreciated, I mean you're going going to do dive bombs with it but it'll give you a nice little shimmer.
I think I'll end up getting them from winfield, I need to get a few more of the strap buttons to replace the schallerish garbage.

Re: Worth the wait?

Posted: Mon May 29, 2023 2:37 pm
by WillyWonka
Pickup question.

Adjusting the pickups, and not going to take anything apart….

Tired to lower the neck pickup and it didn’t want to go lower.

Foam under the chrome bezel but I’m getting the impression the route isn’t deep enough to lower it even if I remove the foam..

Amirite?


Pickup balance was 50-70% louder favoring the neck pickup, but adjusting the poles on the bridge pickup sorted it to perfection..

I love single coils anyway, but I think these hi-gains are my favorites…

Re: Worth the wait?

Posted: Mon May 29, 2023 7:42 pm
by jps
WillyWonka wrote: Mon May 29, 2023 2:37 pm Pickup question.

Adjusting the pickups, and not going to take anything apart….

Tired to lower the neck pickup and it didn’t want to go lower.

Foam under the chrome bezel but I’m getting the impression the route isn’t deep enough to lower it even if I remove the foam..

Amirite?


Pickup balance was 50-70% louder favoring the neck pickup, but adjusting the poles on the bridge pickup sorted it to perfection..

I love single coils anyway, but I think these hi-gains are my favorites…
Try the vintage type rubber Gromits grommets instead, maybe even cutting them in half to make them even thinner. Put then in the four corners, too, just like on vintage Ricks.
4005WB Neck Toaster Detail M 1280 01.jpg