Page 2 of 3
Posted: Sat Feb 28, 2004 8:30 pm
by jnbass
It seems that some of the newer p'ups are glued or double-sided taped to the base.
At least those that I've changed to the aluminium base due to breakage.
Posted: Sat Feb 28, 2004 8:36 pm
by jnbass
I mean the magnet is glued/taped to the base.
If going through all that trouble for alignment, why not this?
Posted: Sun Feb 29, 2004 2:43 am
by paul_yan
Marty,
Thanks.
Jared,
Yeah, you've just reminded me that the treble pickup magnet of my Sophie WAS glued to the baseplate. I used the word "WAS" because of this:
../10625/7203.html"#EECD9C">
Posted: Sun Feb 29, 2004 5:32 am
by jps
Jared,
I assume the holes in your new aluminum baseplates are threaded for the height adjustment screws, right?
Posted: Sun Feb 29, 2004 7:24 am
by jnbass
Jeff-
YESsongs
Posted: Sun Feb 29, 2004 8:01 am
by jps
And of course the holes aren't to Close To The Edge!
Posted: Sun Feb 29, 2004 8:55 am
by rickcrazy
More of that pun lunacy?
Posted: Sun Feb 29, 2004 9:25 am
by ken_james
But they are Fragile
Posted: Sun Feb 29, 2004 10:43 am
by jnbass
in a Roundabout way
Posted: Sun Feb 29, 2004 11:17 am
by mortivan
Pete, it's Your Move...
Posted: Sun Feb 29, 2004 1:32 pm
by jwr2
So Jared ... Are you selling aluminum base plates?
Posted: Sun Feb 29, 2004 8:44 pm
by jnbass
Those are for my RICs that have been stripped out, cracked, UPS'd, etc...
Ya need one?
Posted: Sun Feb 29, 2004 9:11 pm
by jwr2
It might be nice to have an extra ... for future use ...
Posted: Sun Feb 29, 2004 9:47 pm
by jnbass
its for the Survivor.
I'll earmark a few for you on the next run.
Sorry no ALCOA deltas on these pieces, nor the blue stripe.
Will keep looking.
Posted: Mon Mar 01, 2004 2:53 am
by jps
I'd like one too, Jared, as a spare for a project I am working on. Thanks.