Page 3 of 3
Re: Cavity Markings
Posted: Mon Jan 16, 2012 2:43 am
by BobHyde
My '73 4001 has "4001c AG" in the cavity. I wish it was Maria or Jill or something!!
Re: Cavity Markings
Posted: Sun Sep 09, 2018 2:08 pm
by Sugarcane
Has anyone else seen corrections in the cavity writings?
Mine has a serial number written with a thick felt tip pen, which was crossed, and the actual serial number (the one on the jackplate and tag) above, all apparently with the same pen and same handwriting). The two serials are quite close one to another, about a week away in production.
It's a 2010.
Re: Cavity Markings
Posted: Sun Sep 09, 2018 5:05 pm
by scotty
scotty wrote:I found this in my first old 330 i had from the 90s Also inside were 3 spears,2 jugs
and a broken chariot
Hahah I just read this thread again.
I know you shouldn't laugh at your own jokes but hey I did..
Re: Cavity Markings
Posted: Sun Sep 09, 2018 9:09 pm
by jdogric12
Good one!
Re: Cavity Markings
Posted: Mon Sep 10, 2018 8:12 am
by Sugarcane
hmm I did a search and it seems that unprecise or crossed out serials and other stuff are not too uncommon among new and old Rics...
hjarnett wrote:jdogric12aolcom wrote:Har. Yeah, I have one that's got a big wide tape spot (bare wood) with the serial written, without spaces, in pencil, and no other marks like initials or anything. Just wondering if it's normal.
the 650c afg i had made in july 07 had 2 tape spots 2 serial # 1 crossed out both in pencil
posting.php?mode=quote&f=1&p=480345