HELP......I Want to Clean Up My 4003DCM

Vintage, Modern, V & C series, Fretless, Signature & Special Editions

Moderators: rickenbrother, ajish4

User avatar
mikeyesfan
Member
Posts: 398
Joined: Sat Apr 26, 2003 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by mikeyesfan »

Use this for the ADD...
Attachments
BG 4003 shinin.jpg
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by rickenbrother »

That's a better pic, Mike. Now if you could just capture the reflection of the Zymol bottle in the bass, you'd have an ad pic! :mrgreen:
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: HELP......I Want to Clean Up My 4003DCM

Post by jingle_jangle »

Even at that small size, the finish looks DEEP...
User avatar
mikeyesfan
Member
Posts: 398
Joined: Sat Apr 26, 2003 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by mikeyesfan »

Happy New Year!

We played last night in my bassment and my Basses looked GREAT!!!
We had a blast.

OK Now What do I do to maintain this shine on these Basses???
I'm going to Zymol them again this weekend..but when do I Stratch X again?

Thanks again
Attachments
RIC forum 3.jpg
RIC forum 2.jpg
RIC forum 1.jpg
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by rickenbrother »

The basses look good Mike!

I'd say when you think it could look shinier or the shine could look deeper apply the Zymol, unless to start to see fine scratches or swirl marks in the finish, then use Scratch X first before you use the Zymol. How often you will apply Zymol will depend on how much you play your basses.

Where's your S/5 and Monty FL?
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
mikeyesfan
Member
Posts: 398
Joined: Sat Apr 26, 2003 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by mikeyesfan »

rickenbrother wrote:The basses look good Mike!


Where's your S/5 and Monty FL?
They 're sleeping.
I don't feel comfortable playing either one so they sleep.

I LOVE MY DCM!!!!!
User avatar
jingle_jangle
RRF Moderator
Posts: 22679
Joined: Wed Dec 22, 2004 6:00 am
Contact:

Re: HELP......I Want to Clean Up My 4003DCM

Post by jingle_jangle »

mikeyesfan wrote:
OK Now What do I do to maintain this shine on these Basses???
I'm going to Zymol them again this weekend..but when do I Stratch X again?

Thanks again
Great pics, Mike!

You can build up as many coats of Zymol as you like, and your bass' finish will look deeper and deeper. It's the main advantage of the brand--it doesn't strip previous coats of itself, as it's water-based.

All waxes oxidize eventually; then your bass will show a slight hazing or display the "halo" of superfine scratches under a strong point light source like an incandescent or halogen bulb. Re-Zymol at this point. Should the Zymol ever fail to remove this hazing or haloing, then you can re-treat with Scratch-X. Scratch-X has a very, very fine abrasive, so it should not be employed indiscriminately. A properly-Zymolled instrument (four or more coats), kept in its case, will probably not need re-treating with Scratch-X for years. If you gig the instrument, it's going to shed its wax more quickly, but keep it well-waxed and you'll seldom have to revert to Scratch-X.

As you can guess, any fine use-scratches can be taken out with Scratch-X and patience. Always be sure to Zymol afterwards, however.

One more thing: Scratch-X has a petroleum solvent, unlike Zymol. What that means is that everytime you use Scratch-X, it will strip any Zymol (or other wax, for that matter) from the surface, and you're back to ground zero again.
User avatar
rickenbrother
RRF Moderator
Posts: 13194
Joined: Sun May 26, 2002 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by rickenbrother »

Mike, you'll never feel comfortable with them unless you play them enough. At least Zymol them !! :mrgreen:
JETGLO should officially be renamed JETGLO ROCKS! :-)
User avatar
mikeyesfan
Member
Posts: 398
Joined: Sat Apr 26, 2003 5:00 am

Re: HELP......I Want to Clean Up My 4003DCM

Post by mikeyesfan »

jingle_jangle wrote:
mikeyesfan wrote:
OK Now What do I do to maintain this shine on these Basses???
I'm going to Zymol them again this weekend..but when do I Stratch X again?

Thanks again
Great pics, Mike!

You can build up as many coats of Zymol as you like, and your bass' finish will look deeper and deeper. It's the main advantage of the brand--it doesn't strip previous coats of itself, as it's water-based.

All waxes oxidize eventually; then your bass will show a slight hazing or display the "halo" of superfine scratches under a strong point light source like an incandescent or halogen bulb. Re-Zymol at this point. Should the Zymol ever fail to remove this hazing or haloing, then you can re-treat with Scratch-X. Scratch-X has a very, very fine abrasive, so it should not be employed indiscriminately. A properly-Zymolled instrument (four or more coats), kept in its case, will probably not need re-treating with Scratch-X for years. If you gig the instrument, it's going to shed its wax more quickly, but keep it well-waxed and you'll seldom have to revert to Scratch-X.

As you can guess, any fine use-scratches can be taken out with Scratch-X and patience. Always be sure to Zymol afterwards, however.

One more thing: Scratch-X has a petroleum solvent, unlike Zymol. What that means is that everytime you use Scratch-X, it will strip any Zymol (or other wax, for that matter) from the surface, and you're back to ground zero again.

Thanks So much!
Now I get it.
I did not do a good job on the V63.
I still see some super fine halos .

I'm going to play it for a few weeks then it needs Strings, setup, and then reapply the Stratch X and Zymol>
Oh yea strings..time for another thread.LOL
Post Reply

Return to “Rickenbacker Basses: by Joey Vasco & Tony Cabibe”