Page 1 of 1
Standard tuning for a Rick 12 String
Posted: Fri Jun 07, 2002 5:14 pm
by squirebass
This may sound like a stupid question, but how is a Rick 12 string tuned? I've only been playing 6 string for about 10 months, and I've never tuned a 12. Seems like I remember hearing that the lower strings are tuned in octaves and the upper ones in fifths or something. I just got a new 660/12 today and I'm gonna have to tune it up so I can play it! Thanks for the help.
GS
Posted: Fri Jun 07, 2002 6:03 pm
by ted_williams
The low E, the A, the D, and the G (assuming standard tuning) are tuned in octaves, while the B and the high E are tuned in unison. Be careful while tuning the G octave, as it's (usually) the thinnest string on the guitar and prone to breaking. See Mark the MD's tips on stringing and tuning a 12-string.
Posted: Fri Jul 26, 2002 8:47 am
by doctorwho
Here is a 'trick' I use on the 1st and 2nd string pairs: with an electronic tuner, I tune one of the pair ever-so-slightly above (+) and the other ever-so-slightly below (-) the "zero-point" for that note. On my Seiko tuner (I think it's an ST-747, but I'm not at home as I write this), the string is in tune within the +/- 5 range, so I set the strings within this so that the strings are just slightly out of resonance. To me, it adds a bit more "ringing" to those strings.