Page 1 of 3
New headstock design
Posted: Sat Aug 20, 2005 3:14 pm
by rumbush
Has anyone tried a RIC with this configuration yet? If so what are your thoughts as far as weight/balance, tone improvement or degradation, etc.?
I stopped by Sam Ash to pick up some strings today and they had a REALLY nice 360/12MG in a glass display case which they would not open in order for me to try the guitar(???)! For such a small change, the updated headstock is a major aesthetic improvement IMHO. I already have a 660/12 but I like the new headstock so much I'm now mulling over purchasing a 340/12 or a 370/12 in the forthcoming year.
Posted: Sat Aug 20, 2005 5:29 pm
by dale_fortune
This was 1st done in the mid-60's, it was thought to be unnecessary at that time, another production step and not quite as strong of a peg head since the extra maple was being removed. In 1974 I built the next one for my self and it proved to be very strong and a bit head stock lighter. The big advantage is the restringing of you guitar. You'll really appreciate this model if you're one who changes strings frequently.
Posted: Sat Aug 20, 2005 6:32 pm
by desertgoldenboy
Does anyone know...are ALL the new 3xx/12's being built with the new headstock design? I hope so, as I will have a 360/12 on order and I'd sure like to see the new headstock on it.
Posted: Sat Aug 20, 2005 6:39 pm
by jingle_jangle
John Hall said in a previous thread that the new style was being phased in, so I suppose it would matter when your guitar was being ordered/built.
The Sam Ash instrument proves that they're beginning to show up.
Posted: Sat Aug 20, 2005 6:51 pm
by desertgoldenboy
Dziekuje, JJ-ski. I noticed that POTR has a Jetglo 360/12 with the new design. That is encouraging, as Chris must have ordered that quite awhile ago. I figure if I'm ordering now, it should probably be one with the new headstock.
I'd cross my fingers but then I couldn't play very well.
Posted: Sat Aug 20, 2005 7:02 pm
by ben_hall
Only the 300 Series and 620/12's have the new headstock.
So yes, your 360 will have the new one.
Posted: Sat Aug 20, 2005 7:12 pm
by desertgoldenboy
Thanks, Ben! I'm really looking forward to that!
Posted: Fri Aug 26, 2005 5:46 am
by polly_mathis
>>>Only the 300 Series and 620/12's have the new headstock.
Why not the 660s? We wider-neck lovers gotta restring, too!
Posted: Fri Aug 26, 2005 7:27 am
by rumbush
Yeah - my understanding was that all of the non V- or C-series 12-string models would ultimately have the new headstock. No?
Posted: Fri Aug 26, 2005 9:41 am
by jwilli
None of the C or V 12s will have the new headstock design is what I've read.
Posted: Fri Aug 26, 2005 9:59 am
by Scastles
Putting the new head stock on the vintage series would defeat the purpose of keeping the guitars true to their original form. Their web site says the new stocks would be placed on all of their standard 12's, excluding vintage reissue models. I would think a standard 12 would include the 660's?
Posted: Fri Aug 26, 2005 10:10 am
by ken_j
Maybe you need to think of a 660 as a 620V** with a wider neck. It has checkerboard binding, 21 frets, full width fret markers, and toasters. Just a thought.
Posted: Fri Aug 26, 2005 10:26 am
by Scastles
I know I own one.
Posted: Fri Aug 26, 2005 11:46 am
by rumbush
It is a good question though. The 660/12 is not a C- or V-series. Why then isn't the new headstock design being adopted for that model?
Posted: Fri Aug 26, 2005 12:17 pm
by ben_hall
What Ken said.