It's every man for himself!!!!!!!!!!!!!!!
Posted: Fri Sep 16, 2005 10:55 am
Rickresource Rickenbacker Forum
Rickenbacker Forum, Amplifier, Bass and Guitar Register
https://www.rickresource.com/forum/
It's every man for himself!!!!!!!!!!!!!!!
Page 1 of 7
Posted: Fri Sep 16, 2005 10:57 am
Posted: Fri Sep 16, 2005 11:02 am
I know too little here.
Is that a Rose Morris? an S type?
I'm not in, have no fear, I've spent quite enough lately.
Is that a Rose Morris? an S type?
I'm not in, have no fear, I've spent quite enough lately.
Posted: Fri Sep 16, 2005 11:06 am
They McCartneyinized it.Thats too bad.butchers!
Posted: Fri Sep 16, 2005 11:09 am
Mark its probably a 4000 converted,i thought 67[my year]was he cutoff for the RMs,ANDY??
Posted: Fri Sep 16, 2005 11:15 am
Just looking at it.....
Well, the tuners and bridge (with the extra holes)are not stock, the white nut ditto and the upper horn looks like it's been sanded a la Macca.
I'd like to see the p/up surround and bobbin closer. An original Feb 68 should have had a horseshoe and the bobbin should look like this
with the screw polepieces. It's hard to tell with that photo.
I would ask for pot codes on this bass and to see the wiring harness. It almost looks like someone has tricked out a V with an added thumbrest and jackplate...
Well, the tuners and bridge (with the extra holes)are not stock, the white nut ditto and the upper horn looks like it's been sanded a la Macca.
I'd like to see the p/up surround and bobbin closer. An original Feb 68 should have had a horseshoe and the bobbin should look like this
with the screw polepieces. It's hard to tell with that photo.
I would ask for pot codes on this bass and to see the wiring harness. It almost looks like someone has tricked out a V with an added thumbrest and jackplate...
Posted: Fri Sep 16, 2005 11:20 am
Guy's, this looks legit, right????
Posted: Fri Sep 16, 2005 11:29 am
No,It does [as Andy mentioned]look like a tricked out v63 white nut,tuner bushings are like v63,v63 tailpiece,..
Ask to see close ups of the toaster,a 60s toester has little circles in the corners of the black plastic,closeup of the headstock,truss rods would be a dead giveaway.Ask him to take of the guard or you wont bid .
Ask to see close ups of the toaster,a 60s toester has little circles in the corners of the black plastic,closeup of the headstock,truss rods would be a dead giveaway.Ask him to take of the guard or you wont bid .
Posted: Fri Sep 16, 2005 11:33 am
I totally agree with you, Ken - something about that '68' is not quite right. And isn't the lettering on every TRC supposed to be centered?
Posted: Fri Sep 16, 2005 11:41 am
Sergio,good call i didn't see that Yes,they were centered because the made in the USA was to the right side of the trc.[It would be too noticable otherwise]Its a v in my opinion
Posted: Fri Sep 16, 2005 11:44 am
DUDES.....CANT BELIEVE WE MISSED THIS...THE HEAL IS SQUARE IN 68 THEY WERE ROUND.....DAVE,RETRACT YOUR BID........
Posted: Fri Sep 16, 2005 11:46 am
LOL...You are correct Ken. Overlooking the obvious...
Posted: Fri Sep 16, 2005 11:47 am
Andrew ,, obviously it's not Fireglo, another reason to retract the bid.
Posted: Fri Sep 16, 2005 11:49 am
I don't think it looks right either. Looks like a V63 with a '68 jackplate. Too many non original parts otherwise. F.C. would never have let it leave the factory with the bridge pickup screwed on that crooked.
Posted: Fri Sep 16, 2005 12:04 pm
Thank you my freakishly observant friends.
However, do you think it’s still worth $1200.00?
I think I will let my bid stand.
Waiting to hear back now from the seller.
However, do you think it’s still worth $1200.00?
I think I will let my bid stand.
Waiting to hear back now from the seller.