Page 1 of 1
4005 info needed
Posted: Sat May 03, 2003 11:33 am
by dminer
Well, I just picked up a 1966 4005 FG and I need a little info. It's been slightly but permanently modded and I need some info on screws, pup mounting ect. I've checked out pics of other 4005's but I need more detail to find out exactly what parts to get. So, if anyone here owns a 60's 4005 and wouldn't mind sharing some information I'd really appreciate it....thanks, David
Posted: Sat May 03, 2003 11:57 am
by rickcrazy
Congratulations, David.
I don't own a 4005, but I certainly wish I did.
Yeah, there are quite a lot of 4005 pictures about. Check the BunnyBass site, for instance. Also, somewhere in the Forum there were (are) some first class pictures of a 4005. Do a search and you'll find these.
Posted: Sat May 03, 2003 7:35 pm
by dminer
Thanks Sergio, Mark A responded almost immediately to this post and has thouroughly answered all of my questions...the bass was "Modded" at some point with Bill Lawarence pups and routing did occur...although it did come with Ricky reissue toasters...the tuners have been switched out with Rick vintage style...everything else is stock and the finish is really very good with hardly any rash on the back and but a few dings and dents, and it came with the original silver/blue case...the price was right so I'm pretty happy with it. I'm finially a member of THE CHECKERBOARD CLUB!! David
ps...your A saddle is on the way to me and then I'll get it off to you...cheers
Posted: Sun May 04, 2003 12:17 am
by rickcrazy
Many thanks, David.
If you can, please show us some pics of the 4005.
Posted: Mon May 05, 2003 4:32 pm
by jal
Dave I shot a mess of close-up pics of my 1965 FG 4005 for someone here last year who was restoring
one & I may still have them , if not I'll shoot you some new ones just tell me what you need ,,,
Cheers, Jaime
Posted: Tue May 06, 2003 7:02 pm
by dminer
Sergio...I just got back some pictures today, but I don't know how to post them...If I can't figure it out I'll send a couple to you via email...
Jaime...Thanks for your generous offer....Mark gave me all of the info I needed but I would like to see a close up pic of the bridge and or bridge saddles...if you can dig up the pics please send them to me via my profile email address...thanks, David
Posted: Wed May 07, 2003 12:26 am
by rickcrazy
Please do, David. Thanks.
Posted: Wed May 07, 2003 6:49 am
by claudel
Hi
Here's a closeup of a '67 4005 bridge...
http://www.sonic.net/~claudel/4005/after/4005Bridge02.JPG
It could use a cleaning, seems to have grown a few feathers :^)
Also a few more shots in that directory.
Enjoy
Claude
Posted: Wed May 07, 2003 10:57 am
by paul_yan
Congratulations, David.
I'm so glad you finally found this beauty.
Claude,
Awesome!
Posted: Wed May 07, 2003 1:06 pm
by jal
Will do David, looking forward to seeing your new Bass,
Cheers, Jaime
Posted: Wed May 07, 2003 5:37 pm
by dminer
Claude...thanks for the link to the bridge pic...Mine intonates pretty well but the bridge was installed backwards and the saddles moved/switched to accomodate the change...the E and G saddle screws appear to be stuck...someone also ground down the e saddle groove to accomodate the newer wider strings but did a poor job...I might fashion a new set of saddles...they look like aluminum so it shouldn't be too hard to make replacements....
Sergio...pics on the way via email
Paul....glad you could join us again...looks like we've both been workin like dogs to pay for our obsessions!!! pics also on the way to you and perphaps you or the Pickup Guruh could post one or more?
Jaime...that'd be great...I tried to contact you earlier via 4005 email at The Pit and got the letter back as undeliverable *&%$#+
Keep on Rick'n David
Posted: Fri May 09, 2003 12:20 am
by paul_yan
David,
My pleasure to post them for you.
What a babe!!! (Or Babes?)
Posted: Fri May 09, 2003 12:22 am
by paul_yan
Posted: Tue May 13, 2003 3:19 pm
by jal
Ok David I sent you some photos please let me know if you got them & if they are ok, also if you need anything else let me know,,,
Cheers, Jame
