Gold appointments for my 350V63FG
Posted: Mon Jul 31, 2006 9:26 am
Whadaya think guys & gals? Pickguard, truss cover and oven style knobs. What fits? What's available? Thanks.
Rickresource Rickenbacker Forum
Rickenbacker Forum, Amplifier, Bass and Guitar Register
https://www.rickresource.com/forum/
Gold appointments for my 350V63FG
Page 1 of 1
Posted: Mon Jul 31, 2006 9:31 am
Gold guards and TRC look very cool on Fireglo.
Posted: Mon Jul 31, 2006 10:37 am
Absolutely!
You can get the knobs, pickguard, and TRC (exchange) from theRIC Boutique. Mike Parks is another source. The pickguard set is also available from Pickguarian.
You can get the knobs, pickguard, and TRC (exchange) from theRIC Boutique. Mike Parks is another source. The pickguard set is also available from Pickguarian.
Posted: Mon Jul 31, 2006 10:57 am
RIC no longer swaps white for gold.
Posted: Mon Jul 31, 2006 10:59 am
Are you going to put a Bigsby on her?
Posted: Mon Jul 31, 2006 11:32 am
Hi Brian -- no Bigsby for me, thanks. I'm a hardtail guy.
and Hello Paul -- so, how do I do the white/gold alchemy for the TRC?
and thanks also Ken -- would Mike have the TRC?
and yes, Kris! -- I guess it's kinda how the red fades into the wood; visually striking, the gold sorta sets off the whole shebang.
and Hello Paul -- so, how do I do the white/gold alchemy for the TRC?
and thanks also Ken -- would Mike have the TRC?
and yes, Kris! -- I guess it's kinda how the red fades into the wood; visually striking, the gold sorta sets off the whole shebang.
Posted: Mon Jul 31, 2006 12:41 pm
Tracy, I have gold plastic parts on several of my Fireglo Rickenbacker guitars. Great look!
Gold pickguards and oven knobs are readily available but genuine RIC gold nameplates are very difficult to find and they are getting quite expensive. They sometimes show-up on eBay and normally sell for well over $100 US. Good luck with your project.
Gold pickguards and oven knobs are readily available but genuine RIC gold nameplates are very difficult to find and they are getting quite expensive. They sometimes show-up on eBay and normally sell for well over $100 US. Good luck with your project.
Posted: Mon Jul 31, 2006 2:11 pm
Tracy, I have a spare set of gold parts that I put on my 350v63. The only issue is that the lower guard was based on a template of Lennon's guard, so I had to drill as few holes to match the pattern. The additional holes don't show up when I put the white parts back on. I bought two different guards so I could try out different types of gold paint. If you are interested in the gold pickguard send an email to [email protected].
Posted: Mon Jul 31, 2006 3:55 pm
Unfortunately, you'll have to buy a gold TRC from ebay or somewhere else. And yes, they do sell for a fair amount these days.
Posted: Mon Jul 31, 2006 4:07 pm
The gold looks good on the 75th anniversary color too..
Posted: Mon Jul 31, 2006 6:34 pm
Which is...?
Posted: Tue Aug 01, 2006 3:17 am
You can always do the gold treatment to a raised letter TRC.
