Page 1 of 1
Rose Morris parts
Posted: Sat Nov 04, 2006 9:54 am
by scoobyw
HI there,
I own a Ric 1997 Rose Morris 1964 model. I bought in 1990 when I was 15 in near mint condition. It never came with the accent trem arm and want to try and trace one down, preferably an original. Also my bottom E tuner has given up and need to replace it or them. Are there any tuning heads you guys recommend, seems grovers are mostly used on Rics.
Thanks in advance ,
Rob
Posted: Sat Nov 04, 2006 11:43 am
by rick_ovic
Rob, welcome to the Forum. It's sounds like you have a nice Rickenbacker there. Please post a photo or two of it so that we may all share in it's beauty!
Ac'cent vibrato arms are once again able to be ordered through Rickenbacker as a spare part (they were unavailable for some time), however these are the newer style. It seems that they changed a bit over the years.
An original '60s arm will be hard to find. It's often the first part which goes missing on a vintage instrument. I shelled out US$200 for one a couple of years back to complete my '65 Rose Morris 1998. They come up now and then on eBay.
As far as tuners are concerned, I would strongly recommend you retain the original tuners and look at replacing just the non-functioning E tuner. Individual tuners appear on eBay all the time and complete sets come up often as well.
Good luck!
Posted: Sat Nov 04, 2006 11:46 am
by rick_ovic
I've just checked the Rickenbacker website and it appears that the Ac'cent arm is temporarily unavailable again:-
http://www.rickenbacker.com/cart.asp?category=Vibratos
You might try Pick of the Ricks in NJ - Chris Clayton had stock on hand when they were unavailable a couple of years ago.