Page 1 of 1
Mini-toggle switch and the .0047 cap
Posted: Wed Jul 16, 2003 10:18 am
by loverickbass
Hello all! New guy here. Been lurking around for a time. I'm trying to wire in a mini-toggle switch on my 4003 for the cap mod. A few questions, do I need a spdt or dpdt? After I have the correct switch, where do all of the wires go on the switch and where does the cap come into the mix? I know to put the cap between the treble volume pot and the pickup selector switch. I've looked around the site for info but I couldn't find anything this technical on this topic.
Posted: Wed Jul 16, 2003 12:31 pm
by mortivan
Hi Joseph.
Cut the wire connecting the middle lug of the treble volume control to the pickup selector switch. Solder one cut end to one side of the capacitor AND one terminal of a SPST switch. Solder the other cut end to the other side of the capacitor AND the other switch terminal.
The switch connects directly across the capacitor so that when the switch is engaged, the cap. will be shorted, effectively making it "disappear" electronically.
If you have a SPDT switch, just use the middle lug and one end lug. Same for a DPDT switch - just use one of the two poles.
Posted: Wed Jul 16, 2003 2:14 pm
by loverickbass
Thanks John. This 4003 is my "baby" so I want to make sure I get it right.
Posted: Wed Jul 16, 2003 4:53 pm
by jps
I did this on my Rick and I call it "The Vintage Switch".
Posted: Thu Jul 17, 2003 4:25 am
by loverickbass
I think I read somewhere here that the 6 stringers had the .0047 cap in the bridge pickup as well, is this true? I've got a 381v69 coming from Pick of the Ricks and I would like to do the same to it if the 69 381's had the cap.
Posted: Thu Jul 17, 2003 12:52 pm
by jps
Just open it up and take a look.
Posted: Thu Jul 17, 2003 2:49 pm
by loverickbass
Well I think I will just as soon as I get it.