Page 1 of 1
4001CS replacement pickguard -- white or other?
Posted: Tue Sep 02, 2008 10:46 pm
by jakeox
If you were replacing a 4001CS pickguard with a nice back-painted plexi replacement from pickguardian, assuming you can't track down Chris Squire and get him to sign the new pg, do you stick with white, or do you switch it up and go gold or black or something? I'm not sure how they'd look against the (banana) cream finish, but figured it was worth considering. Any thoughts? If it helps, assume that I'd eventually track down a matching trc in whatever non-white color to match.
Re: 4001CS replacement pickguard -- white or other?
Posted: Tue Sep 02, 2008 10:53 pm
by jps
I'd stick with white and have Tony put your signature on it.
Re: 4001CS replacement pickguard -- white or other?
Posted: Tue Sep 02, 2008 10:56 pm
by jakeox
jps wrote:I'd stick with white and have Tony put your signature on it.
Ha! The 4001JBB.
Re: 4001CS replacement pickguard -- white or other?
Posted: Wed Sep 03, 2008 12:16 am
by johnallg
I'd stick with white too. The black would make the bass look like the old Ford Mavericks and Pintos - yellow and black.
Re: 4001CS replacement pickguard -- white or other?
Posted: Wed Sep 03, 2008 10:16 am
by jakeox
Yeah, I'm 98% set on white, just figured I'd consider options while I can.
Re: 4001CS replacement pickguard -- white or other?
Posted: Wed Sep 03, 2008 11:51 am
by rickaddict
I'd go with white also. I also wonder what gold would look like. A Ford Maverick?!
I don't know about that, but you made me smile, John!
But I wouldn't go with back painted. That's just my preference, but none of the original RM's including Chris's had back-painted plexi pickguards. If you're not gonna have the signature, then why not make it more authentic? You could even put the two holes in it for the tug-bar.
Re: 4001CS replacement pickguard -- white or other?
Posted: Wed Sep 03, 2008 12:02 pm
by jakeox
rickaddict wrote:But I wouldn't go with back painted. That's just my preference, but none of the original RM's including Chris's had back-painted plexi pickguards. If you're not gonna have the signature, then why not make it more authentic? You could even put the two holes in it for the tug-bar.
Hm. That's an excellent point. I suppose I could use this opportunity to make it more "authentic".
Re: 4001CS replacement pickguard -- white or other?
Posted: Wed Sep 03, 2008 5:49 pm
by jps
jakeox wrote:rickaddict wrote:But I wouldn't go with back painted. That's just my preference, but none of the original RM's including Chris's had back-painted plexi pickguards. If you're not gonna have the signature, then why not make it more authentic? You could even put the two holes in it for the tug-bar.
Hm. That's an excellent point. I suppose I could use this opportunity to make it more "authentic".
Then don't forget to round off the upper corner near the E string and toaster.
Re: 4001CS replacement pickguard -- white or other?
Posted: Wed Sep 03, 2008 8:48 pm
by johnallg
jps wrote:jakeox wrote:rickaddict wrote:But I wouldn't go with back painted. That's just my preference, but none of the original RM's including Chris's had back-painted plexi pickguards. If you're not gonna have the signature, then why not make it more authentic? You could even put the two holes in it for the tug-bar.
Hm. That's an excellent point. I suppose I could use this opportunity to make it more "authentic".
Then don't forget to round off the upper corner near the E string and toaster.
And get a real horseshoe pup wound to 6k or so.
Re: 4001CS replacement pickguard -- white or other?
Posted: Fri Sep 05, 2008 12:38 pm
by JakeK
jakeox wrote:rickaddict wrote:But I wouldn't go with back painted. That's just my preference, but none of the original RM's including Chris's had back-painted plexi pickguards. If you're not gonna have the signature, then why not make it more authentic? You could even put the two holes in it for the tug-bar.
Hm. That's an excellent point. I suppose I could use this opportunity to make it more "authentic".
Jeff took the words right out me mouth!
Jake, if you are thinking about getting a tug bar, think about this: How often do you play with your thumb?
Re: 4001CS replacement pickguard -- white or other?
Posted: Fri Sep 05, 2008 12:46 pm
by rickaddict
Well you don't have to leave the tug-bar
on...It's the two extra holes in the pick guard that make it like Chris's!
Re: 4001CS replacement pickguard -- white or other?
Posted: Fri Sep 05, 2008 3:15 pm
by jakeox
Yeah, this got too complicated too quickly
Instead I'm going to spray paint the whole thing black, change out the pups to something that I'll need to route for, which I'll do with a hammer and chisel, and then cover the thing in stickers.
Re: 4001CS replacement pickguard -- white or other?
Posted: Fri Sep 05, 2008 4:26 pm
by johnallg
jakeox wrote:Yeah, this got too complicated too quickly
Instead I'm going to spray paint the whole thing black, change out the pups to something that I'll need to route for, which I'll do with a hammer and chisel, and then cover the thing in stickers.
There you go, now you're talking!
Re: 4001CS replacement pickguard -- white or other?
Posted: Fri Sep 05, 2008 5:57 pm
by jps
johnallg wrote:jakeox wrote:Yeah, this got too complicated too quickly
Instead I'm going to spray paint the whole thing black, change out the pups to something that I'll need to route for, which I'll do with a hammer and chisel, and then cover the thing in stickers.
There you go, now you're talking!
Yeah, make it your own!