Page 1 of 1

Jazzmaster Bridge solution?

Posted: Wed Sep 16, 2009 8:32 pm
by marc61
I know many put buzzstops and Mustang bridges on their Jazzmasters but I gave this bridge a try. It wasn't expensive.The posts themselves don't fit firmly into the holes, and the metal thimbles had to be removed to make it fit. When in tune though, the bridge doesn't move at all. I'll know if it's a blessing or a curse after the weekend when my son plays the heck out of it.

Re: Jazzmaster Bridge solution?

Posted: Wed Sep 16, 2009 8:33 pm
by marc61
more pics

Re: Jazzmaster Bridge solution?

Posted: Wed Sep 16, 2009 8:34 pm
by marc61
more pics on the guitar

Re: Jazzmaster Bridge solution?

Posted: Wed Sep 16, 2009 11:12 pm
by sloop_john_b
Wow! That is very similar to a Mosrite bridge. What is it?

Re: Jazzmaster Bridge solution?

Posted: Wed Sep 16, 2009 11:28 pm
by marc61
:D I think it's a Moserite bridge. Bought it here....

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 1:09 am
by jingle_jangle
I'm amazed that the posts and string centers are the same dimensions!

Anyway, a stock Jazzmaster/Jaguar bridge can be fixed in about 5 minutes or less, so the strings will never slip again. Just takes a smallish triangular file and a magic marker to mark the string locations on the threaded sections...

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 6:03 am
by antipodean
jingle_jangle wrote:I'm amazed that the posts and string centers are the same dimensions!

Anyway, a stock Jazzmaster/Jaguar bridge can be fixed in about 5 minutes or less, so the strings will never slip again. Just takes a smallish triangular file and a magic marker to mark the string locations on the threaded sections...
Or use a Mustang Bridge! :mrgreen:

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 6:21 am
by marc61
I started to do that Paul but, was a little nervous that besides deepening the correct groove, I was also flattening the others. If my son doesn't like the bridge(the saddles definitely sit higher), I may work on that again.

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 12:57 pm
by sloop_john_b
antipodean wrote: Or use a Mustang Bridge! :mrgreen:
Nah, doesn't work for me. The E strings still slip out really easily.

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 1:12 pm
by paologregorio
The Buzz Stop worked for me, but I was never happy with the guitar, so I sold it back to its previous owner, who was happy to get it back in its improved condition. :)

My Bigsby Tele has single slot the Mustang bridge saddles, which work quite nicely. The bridge plate for Bigsby Telecasters is set up for the JM/Mustang bridge. :)

Good luck with that bridge Mark; it looks like it's a well-engineered piece that will work nicely with the Jazzmaster. :D

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 1:49 pm
by kennyhowes
+1 on the BuzzStop. No mods, and makes the most sense.

Re: Jazzmaster Bridge solution?

Posted: Thu Sep 17, 2009 1:54 pm
by sloop_john_b
I do a lot of behind the bridge picking and the Buzzstop is going to basically kill those notes. Not really an option here.

Re: Jazzmaster Bridge solution?

Posted: Fri Sep 18, 2009 4:53 pm
by collin
sloop_john_b wrote:I do a lot of behind the bridge picking and the Buzzstop is going to basically kill those notes. Not really an option here.

weee-heeeell......Captain Avant Garde has to play behind the bridge. oooh. :lol: :lol: :lol: 8)

Re: Jazzmaster Bridge solution?

Posted: Fri Sep 18, 2009 5:37 pm
by marc61
It's official. My kid loves the Mosrite style bridge. Just keep in mind that the action especially near the pickups is higher. It does eliminate buzzing, and saddle rattling. While he likes it, I do not recommend for all.

Re: Jazzmaster Bridge solution?

Posted: Fri Sep 18, 2009 6:03 pm
by jingle_jangle
You can correct the action situation by slightly shimming the neck pocket at the body end.